Festive Portal - Festival

Crochet Hello Kitty hat. DIY Kitty Cap hat made from fluffy yarn. Hat with ears Kitty Cap Step by step instructions

Knit a hat for your baby in the shape of his favorite cartoon character. Based on this description, you can knit a bear, bunny, tiger, etc. hat.

Size of knitted hat: OG 48 cm.
Knitted hat height: 13 cm.

  • interesting selection for the site!!!
  • Children's hats, without adult models

You will need: 60 grams of cotton thread and a hook of a suitable size.

How to crochet a baby hat.

Description of work

in the “amigurumi ring” (see), cast on 6 single crochets, tighten the ring and knit 33 rows with single crochets according to the table. In the table, the first column indicates the number of the row, the second column indicates how many loops to add/subtract (“+” means an increase, “-” means a decrease, “+” or “-” zero means that we knit the same number of loops as in the previous row - no extras). The third column indicates the number of loops. So, in the second row, knit 12 single crochets (+6 means adding 6 loops, relative to the first row).

In the third row - add 6 single crochets - resp. we knit 18 single crochets, etc.

When the hat is ready, tie the ears and ties. Make tassels at the end of the ties. Decorate the hat with a bow, sew on the eyes and nose.

You will need:

Yarn 50% wool and 50% acrylic, pekhorka “winter series”;

Main color is white;

Purple color (acrylic 100%);

Yellow color (acrylic 100%);

Black and white color for eyes (acrylic 100%);

Hook 2.5 mm;

Needle, scissors;

Sintepon filler.

Abbreviations

VP - air loop;

etc. - increase with double crochets;

dc. — double crochet;

Art. — single crochet.

cap

1st row: We cast on 5VP with white thread and close it into a ring. Next 3VP for lifting. We knit 11dc.

3rd row: 3VP and alternate until the end of the row: 1dc and increase = 36dc.

We end each row with a connecting loop.

4th row: 3VP, 1dc in the next loop, and increase in the next loop.

We alternate until the end of the row: 2dc and increase. =48dc.

5 row: 3VP and alternate 3dc and increase until the end of the row = 60dc.

6th row: 3VP and alternate 4dc and increase to the end of the row = 72dc.

7th row: 3VP and alternate 5dc and increase to the end of the row = 84dc.

After the diameter of the bottom reaches 12 cm, increases must be made through the row.

8th row: 3VP, knit without increases = 84dc.

9th row: 3VP and alternate 6dc and increase to the end of the row = 96dc.

10th row: 3VP, knit without increases = 96dc.

11th row: 3VP and alternate 7dc and increase to the end of the row = 108dc.

Ears

First, we determine the location of the ears on the hat. They should be closer to the back seam than to the middle of the front. Fold the cap evenly along the back seam and count 14 dc from the seam and make a mark with another yarn. Next, we count 15 dc from the mark and put a second mark. The location of the ear was determined. We do the same on the other side. The ears should be symmetrical.


Let's start knitting the ears. We knit from mark to mark.

1st row: We knit 1 dc in each loop. We unfold the knitting.
2nd row:
3rd row: We make a decrease and knit a dc, at the end we make a decrease.

4th row: We make a decrease and knit a dc, at the end we make a decrease.

5 row: We make a decrease and knit a dc, at the end we make a decrease.

We knit the second ear in the same way.


Ears (4 parts)

We knit the ears according to the pattern with white thread.


Then we fold the 2 parts and tie them with single crochets.


Bow

Middle

1st row: We cast on 2 VPs with a purple thread and close it in a ring, knitting 6 stitches = 6 stitches.

2nd row: In every art. of the previous row we knit 2 stitches = 12 stitches.

3rd row:*1st. , 2st. in the column of the previous row * repeat from * to * 6 times = 18 st.

4th row:*2st. , 2st. in the column of the previous row* repeat from * to * 6 times = 24 st.

5-6 rows: We knit in the round without increments.


Using purple thread we knit 2 parts according to the pattern.



Sew in the middle.


Sew the circle to the bow.


Eyes


We embroider the sparkle in the eyes with white thread.


We knit the same as the eyes, only in yellow.


Sew on the ears. Sew on a bow, adding a little padding polyester to the middle of the bow.


Sew on the nose and eyes.


We tie the entire hat in a circle with single crochets, hiding all the threads.

This master class with a diagram, photo and description will tell you how to crochet a Kitty hat for girls.

This master class with a diagram, photo and description will tell you how to crochet a Kitty hat for girls.

Everyone can choose whatever hats are in stores to suit their taste. However, if mom has imagination and skillful hands, she won’t have to choose anything; mom can easily turn even the most unimaginable ideas into reality. Today I bring to your attention a hat of Kitty the kitten from the cartoon of the same name, the hat is crocheted. Thanks to the use of plush thread, it looks very gentle and attracts the attention of others.
To crochet a hat for girls we will need:

  • White Softy Alize yarn (100% micropolyester) - 1 skein;
  • Black and yellow yarn for decoration;
  • A piece of red felt;
  • Hook.

To calculate the size of the cap, you can use special formulas. To determine the diameter of the bottom of the cap, divide the child’s head circumference by Pi and subtract 1.5 cm from this value. For a child a little over a year old with a head circumference of 47 cm, it turns out: 47/3.14 - 1.5 = 13.5 cm So, We start knitting with five air loops closed in a ring. In the first row we knit 10 double crochets into a ring. Next we make additions, that is, we knit 2 double crochets into one loop. In the second row we make such additions in every second loop, in the third row - in every third loop, in the fourth row - in every fourth loop, etc. Thus, we get this round bottom of the hat with a diameter of 13-14 cm.
Next, we knit the cap without any additions to the depth we need. The depth of my cap turned out to be 12 cm.
We measure the distance between the ears. To do this, it is better to try the hat on the child so as not to make a mistake and the ears are in the right place. I got this distance to be 18 cm. Let's start knitting the ears. To do this, we knit 15 double crochets from your mark. Turning the product over, we knit rounded ears, decreasing one column at a time on each side. The height of the ears is 6 cm, but this is also individual, do not forget to try the hat on your baby.
Without breaking the thread at the end of knitting the ears, we immediately knit a chain of 50 air loops. We got the ties for the hat.
The hat is ready. The distance between the ears at the back was 15 cm. At this distance, I knitted another row with double crochets so that the back of the hat would better cover the baby’s neck.
Now let's start knitting cat ears. To do this, it is also best to put a hat on the child and mark with a pin or thread the place where they should be located. We knit 12 double crochets along the intended line and, turning the product over, knit triangular ears, reducing the number of stitches in each row.
Let's start designing the kitten's face. Using black yarn, we knit a series of double crochets into an amigurumi ring to create eyes. We knit the nose with yellow yarn, it should be slightly oval. To do this, we knit a row of double crochets not into a ring, but into a chain of 3 - 4 chain stitches.
Sew the eyes and nose to the hat. We embroider antennae with black thread.
We form a bow from red felt and sew it on the side, next to the ear.
We got such a wonderful hat. Your baby will be happy, and the snow-white kitten will not go unnoticed during a walk.

Comments

Related posts:

This master class will teach you how to crochet a hat for newborns - a bear hat. A detailed master class with photos will tell you how to crochet a kit for a girl with your own hands. A master class with a detailed description and photo will show you how to crochet a toy - the symbol of the year - a monkey for a Christmas tree

The Hello Kitty character is very popular, it was invented by Japanese animators, but now it is already a real brand: such a design can be found on children's dishes, things, stationery, and if you have already mastered crochet hats for children, then be sure to take this option for decorating it. Such a gift will surely make the little princess happy and will warm her ears on the first cold autumn days. This model can be mastered even by a beginner who has never knitted a product before, but has only mastered the variations of various loops.

Crochet hats for children

Materials we need to complete knitting hats for children: white yarn, you can leave its thickness at your discretion; it is advisable to take threads with a natural composition for your child. In our case, this is Vita Brilliant yarn - 55% acrylic, 45% wool. There are approximately 380 meters of yarn in 100 g, so for this product one skein will be enough, and if there is a little yarn left, you can find out, it will tell you all the secrets.

We knitted the hat in two threads, for this we need to first divide the skein into 2 parts, so unwind half. It will be more difficult to knit from one skein; to do this, take one thread from the outside and pull the other from the end.

You will need two types of knitting needles: circular and straight. Choose the number of tools in accordance with the thickness of the yarn you have chosen, the advice of a sales consultant will help you with this. In our case, knitting needles No. 3. You also need a knitting needle, which you will use to sew the open loops of the cap.

Before you start knitting, you need to measure the circumference of the child’s head, in our case it is 50 cm. The hat should be made a little tighter, since the knitted fabric will stretch a little, about 2 cm.

When you cast on stitches for the first row, use straight needles. You need to collect 110 of them.

This hat will not have seams, so the loops need to be transferred to circular knitting needles, then you need to knit an elastic band - the first row. It is knitted in a two by two pattern, so two purls and two knits will alternate.

Knitting pattern for a baby hat is clear, now it needs to be connected into a circle, while the last loop of the row needs to be moved from the right to the left knitting needle, now it will be next to the first loop. They need to be knitted together, thus completing the circle.

So you need to continue weaving in a circle with a 2 by 2 elastic band so that it becomes the desired height. In our version, it will be four centimeters (that’s 14 rows).

Now the elastic band is ready, but knitting continues in the round, using only knit stitches, that is, you get knit stitch. You need to knit 54 rows of satin stitch, so you will get a height from the elastic of fifteen centimeters.

Now the hat is almost ready, but we still need to sew the open loops. To do this, you need to use a knitted seam - “loop to loop”, because it is almost invisible, and it also helps maintain the elasticity of the knitted fabric, because it is very stretchable.

Be careful not to let the stitches unravel as you remove them from the needles. It will be more convenient to sew them if you steam them first, but the line of the knitting needles may be damaged as a result, since it is affected by high temperatures, so for this procedure the loops can be transferred to straight knitting needles, you will get 55 for each.

When you steam the hat, hold the iron suspended and should not touch the knitted fabric. When processing the main thread, one end should be left approximately five times longer than the length of the seam.

Now you need to take a knitting needle and point the ends of two knitting needles to the right. Sew the loops from right to left, removing them from the knitting needles gradually.

Because the knitting openwork hats for children occurs in a circular manner, the product does not have a clear boundary between the front and back parts. When you move it onto straight knitting needles, the edge will be marked, you will have front and back walls.

Knitting hats for children

Now let’s sew: moving away from you, insert the needle into the first loop of the front row; your needle should enter from the front side and come out from the wrong side. Stretch the thread, bring the needle towards you, but now into the first loop of the back row, then move it away from you into the next one of the same row.

Pull the thread, but do not tighten it too much. You can watch this process in a master class with photographs. It turns out that the needle must pass through each loop twice. It is important to pull the thread evenly, not to pull it tightly, then the seam will be invisible.

You now have a hat ready, and you need to decorate it in the Hello Kitty style. First, we separate the corners with large stitches, so we get “ears”. We will embroider Kitty's face with beads. For the eyes and antennae we will take black beads, and for the nose - yellow. It is better to give preference to large beads, because small ones will most likely “drown” in the knitting.

For embroidery you need to take monofilament, transparent it will be completely invisible, but you can also take thin fishing line. The needle must be thin so that the beads can easily pass through it.

For the bow, you need to take not only the pink ribbon that you have already made from, but also auxiliary materials - pins and scissors.

Be sure to master and tell you how you can use leftover yarn to knit motifs.

Thinner threads, preferably “iris” should be taken if you are mastering knitting for children - summer hats will be able to cover the baby's head from the scorching rays of the sun.

Related publications