Knitted wrap skirt. Wine red wrap skirt. knitting. Knitted openwork skirt: diagrams, description

A hand-knitted knitted skirt is a wardrobe item that is appropriate in both cold winters and hot summers. It's all about choosing the right yarn and pattern.

Knitted skirt - the height of elegance

For the cold season, a skirt knitted from alpaca using stockinette stitch using a seamless method on circular knitting needles is suitable. Its lower third is a relief design of a shawl pattern with decorative vertical stripes. This visually lengthens the silhouette and makes the model original. An unusual belt in a contrasting color, tied with a bow, adds elegance to the skirt.

Recently, colored knitting has become fashionable again. It can be technologically simple, when colored stripes cross the skirt panel obliquely, or it can be complex jacquard:

• In the first case, these are skirts designed for both cool weather and the beach. These styles go well with a plain top and a similarly knitted scarf. This makes the ensemble complete.
• In the second, jacquard patterned skirts are distinguished by a decorative pattern, geometrically correct, based on a combination of contrasting colors, which makes them a self-sufficient wardrobe item.

In order not to overload the image, such skirts should be combined with a monochrome, laconic top. Thick tights and flat shoes will look good with them.

Skirts knitted with a voluminous pattern using decorative braids, plaits, and rice knitting are always popular. This model holds its shape well. They visually elongate the figure, and the type of pattern itself gives the image coziness and charming charm.

Openwork knitted skirts - lightness and beauty

Skirts can also be knitted with openwork patterns. In this case, you get an easily draped fabric that can be used for a wrap style. This skirt requires a petticoat underneath. Lace knitwear emphasizes the femininity of the image.

In order to knit a beautiful skirt yourself, you can combine knitting techniques using a crochet hook and knitting needles. To make the model look less strict, a skirt knitted with stockinette stitch can be supplemented along the bottom line with decorative flowers crocheted.

Knitting opens up possibilities for imagination and allows needlewomen to diversify their wardrobe.

A fashionable model of a wrap skirt knitted across with beautiful openwork patterns with patterns and a free knitting description.

You will need: 300 (350) grams of sand yarn, consisting of 100% cotton; thread length 95 meters in 50 grams; knitting needles No. 5.5; circular needles No. 5.

Wrap skirt sizes: 34-36 (38-40).

Pattern 1: garter stitch = knit and purl rows – knit stitches.

Pattern 2: knit stitch = knit rows – knit stitches, purl rows – purl loops.

Pattern 3: openwork strip (3 loops).

Front rows: 1 yarn over, knit 3 loops together with a pull so that the middle loop is on top (slip 2 loops together like knit stitches, knit 1 and pull it through the removed loops), 1 yarn over. Purl rows: purl loops and yarn overs.

All subsequent patterns include: the diagram shows the front rows. In purl rows, knit all loops and yarn overs with purl loops.

Pattern 4: openwork pattern A (for 12 loops) = knit according to pattern 1. Constantly repeat rows 1-20.

Pattern 5: openwork pattern B (for 9 loops) = knit according to pattern 2. Constantly repeat rows 1-12.

Pattern 6: openwork pattern C (for 27 loops) = knit according to pattern 3. Constantly repeat rows 1-18.

Medium density knitting of a wrap skirt: 16 loops per 25 rows corresponds to 10 by 10 cm.

Description of knitting a wrap skirt

Attention: knit the skirt crosswise, starting from the right half. Arrow on pattern = knitting direction.

Cast on 78 stitches and for the placket knit 1 cm or 3 rows with pattern 1, starting with purl 1 row.

Continue working as follows: edge loop, 1 loop with pattern 2, 3 loops with pattern 3, 12 loops with pattern 4, 3 loops with pattern 3, 9 loops with pattern 5, 3 loops with pattern 3, 12 loops with pattern 4, 4 loops with pattern 2, 27 loops with pattern 6, 3 loops in pattern 1 (= bottom bar, including edge).

After 101 cm or 252 rows (108 cm or 270 rows) from the bar, purl 3 more rows for the final bar, then in the next purl row, bind off all the loops like knit stitches.

Assembly: for a short tie, cast on 42 loops on circular needles, then on the right side edge of the skirt, cast on 158 (168) loops for the belt and for a long tie, cast on 148 loops = 348 (358) loops.

Then, starting from the 1st purl row, knit with pattern 1, while in the 1st row on the section of the skirt waistband, evenly distributed, decrease 30 loops = 318 (328) loops.

After 2.5 cm or 8 rows in the next purl row, bind off all the loops as if they were knit stitches.

Wrap the skirt around the hips, with a long tie in the appropriate place through the top openwork strip and the ends of the ties.

Features of knitting women's skirts. Schemes and descriptions.

The nature of a woman is to bring beauty to the world. The first thing that comes to mind is physical, that is, pleasant appearance and clothes.

Paying attention to the life of our ancestors and the way of life of all peoples, we will see that women only wore dresses and/or skirts. Although our century has brought some degree of freedom in clothing and styles, subconsciously we are drawn to women's clothing. Needlewomen always create interesting models of skirts for different seasons and occasions.

Let's talk in more detail about the nuances of knitting women's skirts and look at photos of finished models.

Skirt with knitting needles in a zigzag pattern: diagram, description, photo

The zigzag pattern is made either with openwork elements or without them. In the second case, make crossed yarn overs or broaches from the bottom row.

The pattern diagram is below.

When selecting yarn for a skirt, take either:

• sectional dyeing thread
• alternate several colors, including different textured yarns

After taking measurements, making a control sample and determining the knitting density, draw diagrams of the skirt and alternating stripes.

Choose the knitting direction either from top to bottom or vice versa. Please note that your product will be narrower in the waist area.

Prepare an elastic band or elastic thread in advance. Weave the latter into the work above the belt along with the main yarn.

Below are several descriptions and patterns for knitting skirts with a zigzag pattern:

And photos of finished skirt models:

Knitted sun skirt: diagram, description, photo

A light flowing sun skirt is an invariable attribute of women's summer looks. It is great for ladies of any body type.

Stock up on long knitting needles of the required thickness before starting knitting.

The sun skirt consists of:

• rubber bands
• coquettes
• wide part

You can not knit a yoke, but start expanding the fabric.

The longer the skirt, the more loops on your knitting needles. Therefore, think in advance about the possibility of dividing the skirt fabrics into 2 parts and then stitching them together.

Below we add diagrams and descriptions of the work.

Below is a photo of the finished sun skirts:

Openwork skirt with knitting needles: diagram, description, photo

Openwork skirts attract attention with their lightness and beauty. The longer they are, the more interesting they look on women.

Insert openwork on similar skirts:

• along the bottom edge
• from the middle down
• all over the canvas

In the latter case, consider the length and material for the lining.

• Choose openwork patterns for knitting midi and maxi skirts that have a straight or trapezoidal shape.
• The best choice of yarn would be pure cotton or with a small percentage of acrylic.
• Stock up on long knitting needles with fishing line.

And we’ll add a few ready-made job descriptions.

And photos of finished openwork skirts:

Knitted pencil skirt: knitting pattern, description, photo

A feminine and stylish pencil skirt will highlight the beauty of your shape, regardless of your build and height.

Spring is the time when you definitely need to wear a new knitted skirt.

A similar model happens:

• in single yarn and with jacquard motifs
• regular knitting and intricate weaves of braids and arans

To start bringing your pencil skirt to life, you will need:

• any yarn and knitting needles of equal thickness
• sketch, measurements taken and patterns
• patience and time to work

We add a number of ready-made patterns with a description of knitting a pencil skirt.

description and knitting pattern for a warm pencil skirt

And a small selection of photos of finished models.

How to knit a skirt with knitting needles diagonally?

For such a skirt, take either:

• section-dyed Kauni type yarn
• several colorful skeins of yarn

A regular set of 2 knitting needles will suit you.

• The knitting pattern is a rib, or alternating knit and purl rows on one side of the fabric.
• Start knitting after taking your measurements and marking them on the skirt diagram.
• The direction of your movement is from corner to corner diagonally. Knit 2 fabrics separately and then sew them together.
• Cast on 3 stitches and knit and purl a row.
• Begin to expand the fabric by adding one loop on the front side on each side along the edges. In total, in row 3 you will have 5 loops, in row 5 - 7, and so on.
• Having reached the width of the skirt on one side of the triangular fabric, begin decreasing along it. The scheme is similar to addition. That is, you knit 2 loops together before the edge stitch. On the other side of the triangle, continue adding.
• When you get the length of the skirt according to it, start decreasing. In total, you cut loops on both sides of the skirt fabric.
• At the same time, watch for the alternation of color stripes if you are working with several multi-colored balls.
• Having reached 3 loops on the knitting needles, close them and start knitting the second fabric.
• Start working on it from the corner, which in the future will be sewn to the corner of the beginning of the first part of the skirt.
• The operating procedure is similar to that discussed above. However, be careful about the symmetry and width of the color bands.
• Sew both fabrics.
• Raise the loops in a circle and make an elastic band. If desired, fold it and sew it, thread the elastic.

Below we add a couple of descriptions and patterns for knitting skirts in the diagonal direction.

How to knit a pleated skirt?

Ribbed pleated skirts are a great option for the office and relaxing in the warm company of friends.

There are several techniques for pleated knitting on knitting needles:

• imitation, or hint of folds
• from removed loops
• with laying out part of the canvas in a real fold

Below are the pictures for more details about them.

Based on the presence of pleated zones on skirts, there are:

• on a continuous canvas
• only in the lower part

Typically, pleated repeat is an even number of loops, for example, 10 or 12.

For A-line skirts, use the pleated technique of removed loops with expansion at the edges.

If you have decided on yarn, knitting needles, and a sketch of a skirt, then proceed as follows:

• tie an elastic band of the desired height
• add stitches and continue with either stockinette stitch or imitation pleat stitch
• Having reached the height of the yoke, begin to form real folds according to the method indicated above in the picture
• continue knitting using the pleated imitation technique to the bottom edge of the skirt
• close the loops loosely without tightening, otherwise it will puff up
• try the finished product and let dry

Let's add a couple of diagrams and ready-made descriptions of pleated knitted skirts.

How to knit a Bulgarian skirt?

The peculiarity of this skirt is that it works in sections that differ from each other:

• number of loops
• knitting needle thickness
• pattern repeat

Note that the main pattern is an elastic band that expands from section to section.

You need:

• yarn of one color or several 400-700 g, depending on the length of the future skirt and its size,
• 4 sets of circular knitting needles of different diameters in increasing order. If you don't want the skirt to be too full, use one set,
• hook for casting on and closing loops,
• marker,
• soft meter and scissors.

Operating procedure:

• measure the circumference of the hips and waist, draw a diagram of the future skirt indicating its length,
• determine the knitting density on the sample,
• cast on the required number of loops equal to your waist size,
• Mark the beginning of the row with a marker,
• knit with a 1x1 elastic band to a height of 12 cm,
• change the knitting needles as desired and add loops - after each loop, except for the edge loops, one at a time,
• continue working with a 2x2 elastic band to a height of 15 cm,
• repeat the procedure of changing needles and adding stitches. Perform the last step like this - after 2 knits and 2 purls, 1 loop each. In total, for 4 loops of the fabric there will be 2 added loops,
• change the pattern to 3x3 elastic and continue 19 cm,
• Replace the needles again and add stitches. Now every 3 knits and purls 1 loop. In total, for 6 loops of the main fabric you will get 2 new ones,
• knit another 24 cm with a 4x4 elastic band and bind off the loops without pulling the thread,
• go back to the beginning of the work, pick up the loops and work 3 cm in stockinette stitch, then purl a row, knit 3 cm again,
• connect the end of the fabric to the first row of elastic loops, leave a small gap,
• insert the elastic into it, wash and dry the skirt.

If you need a shorter skirt, distribute the segments, for example like this:

• first - 11 cm
• second - 13 cm
• third - 13 cm
• fourth - 11 cm

How to knit a mohair skirt?

Weightless mohair threads lie easily on knitting needles, and products made from them are beautiful, always in fashion and give the owner warmth.

• Simple and openwork patterns look beautiful on this yarn.
• More often, craftswomen select options from the latter for skirts.
• Since mohair is light, decide to create a long flared skirt.

To do this, prepare:

• larger diameter knitting needles
• one or more openwork patterns
• diagram and your measurements
• lining fabric

Start working from the top, from the waist. Complete part of the fabric with an elastic band at the desired height.

• Proceed to knitting the main pattern.
• For convenience, think through your work step by step and mark the transition lines to the next one on the diagram. Combinations with expanding the pattern and changing the knitting needles are possible.
• Be prepared for an excessive number of stitches in the final section of the skirt. It can be 1000 or more loops.
• To make the work easier, knit a skirt from 4 segments and then sew them together. Or buy knitting needles on a long line in advance to avoid seams.

Wash the finished skirt fabric and lay it out until completely dry. Then sew on the lining and insert the elastic.

How to knit a warm skirt for the winter?

For a warm skirt for the winter, choose wool yarn and beautiful patterns from braids, arans, and their weaves. If you choose thick natural threads, then focus your attention on simple patterns, for example, garter stitch, rice.

The combination of several colors on winter skirts will oblige you to maintain color harmony throughout the entire look.

The following winter skirt models will suit you:

• straight silhouettes
• with a slight taper towards the bottom, or a pencil
• trapezoid
• moderate flare

Plan the length for a warm skirt to the knee or below.

Knit it:

• continuous fabric in a circle
• followed by stitching on one side
• 2 parts

How to knit a miniskirt with knitting needles?

Mini skirts have firmly taken a fatal position in women's looks. Linking them is quite simple. Prepare:

• a little yarn - about 300 g
• knitting needles
• favorite pattern/s
• diagram indicating the height and width in centimeters according to your parameters

The operating procedure is similar to the classic one:

• rubber
• yoke or main fabric with a slight expansion after the previous stage
• Tight loop closure for straight and tapered silhouettes
• stitching if you did not knit in the round
• wash, dry and wear

How to knit an Eiffel Tower skirt?

This skirt model is similar to the Eiffel Tower - just as slender and beautiful. On it, needlewomen imitate the pride of France with braids, arans and their interweaving.

The skirt has the shape of a light flared bottom, the inner parts of which contain either voluminous or simple patterns.

The optimal length is to the toes. But it is also allowed up to the knees.

When choosing yarn for knitting such a skirt, pay attention to:

• wool
• wool mixture
• twisted cotton

Other types of yarn will not hold the aran without breaking the pattern.

See the picture below for a description of the work.

How to knit a jacquard skirt?

Knitting a jacquard skirt can be done by a craftswoman with any level of training. The main thing is to carefully follow the drawing.

If you don't like circular knitting, work on the skirt fabric and then stitch it at the back.

Choose any yarn for both the main motif and the base fabric.

The jacquard motif on knitted skirts can be:

• large - for the entire canvas
• small - displayed in a small area/strip

Let's add a few examples of jacquard skirt models and descriptions of the work on them.

How to knit a skirt from ribbon yarn?

Ribbon yarn itself looks interesting and not boring. Therefore, knit products from it with simple patterns.

Ribbon yarn resembles braid and comes in different thicknesses.

• Combine it with fine natural yarn, such as cotton. Knit the rib and yoke as usual, then insert the ribbon yarn.
• This will give you playful ruffles on the skirt as the ribbon yarn adds volume.
• Work with garter needles or those connected with fishing line. Ribbon yarn is extremely difficult to sew if it is placed along the edges of the product.

If you are the owner of curvy figures, avoid knitting for yourself with such threads.

How to knit a flared skirt?

Perhaps the most popular type of handmade skirt is flared. Such models are appropriate for women of all ages and sizes.

• When drawing a skirt diagram, think about the location of the line of expansion of the fabric. Either it starts immediately from the outer row of the elastic band, or 10-15 cm below.
• Choose yarn with any composition except excessively thick and tape.
• Interesting models of flared skirts with wedges made of braids framing their edges.

As an alternative, knit a similar skirt with a common fabric vertically. To imitate the soft expansion/contraction of a skirt, use the short row technique.

How to knit an Assol skirt with knitting needles?

The assol skirt is suitable for young slender women. It is characterized by:

• short length
• flounce/folds at the bottom
• decoration of the yoke with a braid pattern
• expansion of the canvas in 2 stages - from the elastic band and to form the shuttlecock
• combination of several colors of yarn
• knitting in the round, that is, without a seam

For a detailed description of the work on creating an assol skirt, see the picture.

How to knit a godet skirt for women?

Godet skirts gained popularity in the last century. They have an elongated main fabric with a flared narrow edge. This skirt model favorably slims its owner and is suitable for both the office and friendly gatherings in a cafe.

• Draw a diagram of the future skirt. Its length without a flounce at the hem will be either just above the knee, or clearly along its line.
• The height of the flared flounce varies between 8-20 cm.
• To knit a godet skirt, choose easy-to-work yarn, such as acrylic or cotton.

The operating procedure is as follows:

• tie an elastic band and tuck it in,
• add loops to transform into a yoke. Moderate expansion of the fabric to the hip line is allowed,
• reduce the number of loops and knit a straight fabric,
• to emphasize the slimness of your figure, plan to reduce the loops until you reach the start line of the shuttlecock,
• double the number of stitches on the needles and knit the flared part of the skirt.

Knitted pleated skirt

The fold on a knitted skirt is achieved by:

• pleated
• elongated loops
• alternating knit and purl stitches

The picture below shows the technique for creating folds.

In shape, these models are similar to a trapezoid, the wide part of which is formed by folds.

A pleated skirt is suitable for women of any age and size.

Before starting knitting, prepare:

• yarn and knitting needles
• detailed diagram of the skirt indicating areas with folds
• your measurements

Determine the direction of work yourself - either longitudinal or transverse. However, the second option is within the capabilities of experienced needlewomen with good spatial imagination.

• After the elastic band, slightly expand the fabric by adding loops. Continue even knitting. Insert braids if desired.
• After, for example, 10-15 cm, double the number of loops on the knitting needles. Knit a flounce in stockinette stitch.
• Close the loops freely, without pulling the fabric.
• Fold the last row inside to the wrong side.

Knitted wrap skirt

An interesting skirt model that is knitted in one piece on 2 knitting needles without stitching. In this case, choose the direction of work at your discretion:

• longitudinal
• transverse
• combined
• diagonal

In addition, such skirts are appropriate in combination with trousers. Then tie the product so that there is an open area at the junction.

Record the smell either:

• by turns
• stitching the fabric overlapping
• on the buttons

Knitting order:

• measure your hips and add 15 cm to the resulting value for the smell,
• Cast on 4 stitches on the knitting needles and knit alternate rows with knit and purl
• on the front side of the fabric, add 1 loop after and before the edge stitches, knit the wrong side according to the pattern
• Having reached the point of the length of the skirt on one side of the triangle, shorten the loops along it. To do this, knit 2 loops together before the edge, pulling one through the other,
• when the length of the other side of the fabric is equal to the circumference of the hips plus the width of the wrap, cut the loops on this side as well,
• fold the finished part of the skirt so that the smell overlaps,
• pick up loops in the circle to knit an elastic waistband. Pull the thread through the double fabric,
• Tuck the elastic and connect it to the first row. Thread the elastic band and sew the waistband completely,
• try the skirt, let it dry on a horizontal surface.

Knitted long skirt

The length of the skirt that is closest to the feminine essence is floor-length.

• To knit it, you will need 2-3 times more yarn than for any other. Approximately 700-1000 g.
• It is convenient to make a long skirt on 2 knitting needles on a fishing line.
• Sketch a simple sketch of the future skirt, plan for the narrowing of the fabric 10-15 cm to the end, provided that you knit from the heels to the waist. The classic movement in work is also allowed - from the elastic band to the hem.
• To decorate the finished skirt, make a cord-belt from the same yarn as the main fabric. And also crochet the hem, for example, “crawfish step”.

Large size knitted skirt: diagram with description

Curvy women are irresistible in skirts. However, in the preparatory stage for knitting, consider a number of points:

• Yarn consumption will be slightly higher
• knitting needles are needed longer and better on the fishing line
• it will take more time to implement

Choose a pattern for the skirt and its knitting technique so that it does not add visually unwanted volume to you. For example, leave a lot of braids on the yoke or extreme widening of the fabric immediately from the waist line for thin girls.

You can knit a skirt like this quickly, since you will use knitting needles of the appropriate diameter for thick yarn.

A regular stockinette/garter stitch on a skirt will look like a warm pattern. And braid weaves will add originality to your product.

Knit either:

• in the round on stocking needles
• on knitting needles with fishing line with further stitching of the fabric

Due to the density of the thick yarn, try to minimize the number of seams. This way you will achieve comfort in wearing a skirt.

Don't make it too flared. Thick yarn is quite stiff in the finished product. It may bulge.

Knitted skirt with clasp pattern

A skirt with a lock pattern is suitable for spring and autumn. Insert it either partially or over the entire area of ​​the knitted fabric.

Since the appearance of the “clasp” pattern vaguely resembles braids, skirt models in which it is present on the yoke are especially interesting.

The pattern diagram is below.

Knitted skirt with peacock tail pattern

Peacock tail skirts have a flared shape. Make a similar pattern using any thick yarn.

These skirts come in:

• openwork and without openwork
• midi and maxi

Below we will add pictures and a diagram of variations of the peacock tail pattern.

Second in simplicity and popularity after knit/garter stitch skirts.

Knit it with the same elastic band along the entire length or alternate through segments, as we discussed in the section on creating a Bulgarian skirt.

Accordingly, skirts made with elastic are:

• midi and mini
• in the form of a pipe and trapezoid

Prepare yarn of moderate thickness of any origin and knitting needles to match the diameter of its thread.

• Make an elastic band to secure it at the waist.
• Add loops to expand the fabric and change the elastic pattern to a wider one. For example, you worked with 1x1, but switch to 3x3 or 4x4.
• Make accents with braids made on the face strips of elastic. Try to insert them rarely so as not to overload the skirt.

Let's add a couple of job descriptions for inspiration.

Video: how to knit a women's skirt?

You will need

Patterns and schemes

Garter stitch

Facial surface

Openwork strip (3 loops)

All subsequent patterns include: the diagram shows the front rows. In purl rows, purl all loops and yarn overs.

Openwork pattern A (12 loops)

Openwork pattern B (9 loops)

Openwork pattern C (27 loops)

Knitting density

Attention!

Pattern

Completing of the work

Continue working as follows: edge stitch, 1 p. in stockinette stitch, 3 p. in openwork stripe, 12 p. in openwork pattern A, 3 p. in openwork pattern, 9 p. in openwork pattern B, 3 p. in openwork stripe, 12 p. in openwork pattern A, 4 stitches in stockinette stitch, 27 stitches in openwork pattern C, 3 stitches in garter stitch (= bottom placket, including edge stitch).

After 101 cm = 252 rows (108 cm = 270 rows) from the bar, purl 3 more rows for the final bar, then in the next purl row, bind off all the loops like knit stitches.

Assembly

Then, starting from the 1st purl row, knit in garter stitch, while in the 1st row on the skirt waist section, evenly distributed, decrease 30 sts = 318 (328) sts.

After 2.5 cm = 8 rows in the next purl row, bind off all stitches like knit stitches.

Wrap the skirt around the hips, with a long tie in the appropriate place through the top openwork strip and the ends of the ties.

Photo: magazine"Sabrina"№3/2017

This short crochet wrap skirt is made from bamboo fiber. However, if bamboo yarn is not available in your favorite store, then use any other yarn with a suitable thread thickness. First, individual square ones are knitted, which are then joined into a rectangular skirt fabric. The skirt is adjusted to fit by sewing on loops and buttons after fitting. Model by designer Emmy Swenson.

Knitted wrap skirt sizes: XS (S, M, L, XL, 2XL)

Finished skirt size:

Width: 109 cm (122 cm; 134.5 cm; 147 cm; 160 cm; 173 cm)

Length from waist to hem: about 45 cm
If you liked this model, then SUBSCRIBE to site updates Knitted skirts.ru

Note: the skirt is a rectangular fabric that wraps around the waist. To calculate the size that suits you, the waist size will correspond to ½ to 3/5 of the total length of the knitted panel of the skirt. For example, for size S the waist circumference will be from 60 to 70 cm, and for size M the waist circumference can be 66-80 cm. To lengthen this skirt, simply knit an additional row of motifs. Each added row will lengthen the skirt by approximately 6cm.

And here’s another larger photo of this knitted skirt:

Knitting materials:

• grey-beige yarn (100% bamboo fibers, 125 m/50 g): 350 g (400 g, 450 g, 500 g, 550 g, 600 g)
• dark blue yarn of the same composition and with the same thread thickness: 50 g (50 g, 100 g, 100 g, 100 g, 100 g)
• hook 3.5 mm
• darning needle
• 2 buttons with a diameter of 2.5 cm
• Matching sewing thread and sewing needle

Knitting density: the size of the motif after moistening and drying is 6.4 cm by 6.4 cm

Conventions for describing knitting:

VP - air pet.

RLS - double crochets

PS - half double crochets

Dc - double crochet

Description of knitting a wrap skirt:

Before starting knitting, make a life-size skirt pattern (a rectangle with a width of 45 cm and a length according to the dimensions indicated above)

Knitting square motifs:

Knit 18 (18, 24, 28, 30, 34) motifs with dark blue yarn.

Knit 115 (129, 137, 147, 159, 169) motifs with gray-beige yarn.

The motifs are knitted in circular rows:

1 lap. row: 3 VP (= 1 SSN), 11 SSN in the first VP, PS in a chain of 3 VP.

2nd circle row: 3 VP (= 1 dc), 2 dc in 1st dc, (dc in next 2 dc, 3 dc in next dc) 3 times, dc in next. 2 SSN, PS in a chain of 3 VP.

3 circle. row: 3 VP (= 1 dc), 2 dc in the 1st dc, (dc in the next 4 dc, 3 dc in the next dc) 3 times, dc in the next. 4 SSN, PS in a chain of 3 VP.

4 circle. row: 3 VP (= 1 dc), 2 dc in 1st dc, (dc in next 6 dc, 3 dc and next dc) 3 times, dc in next. 6 SSN, PS in a chain of 3 VP.

Fasten and cut the thread.

Moisten all motifs, straighten them and let them dry.

Assembling motifs into a knitted skirt:

Lay out the finished motifs on the pattern, distributing the blue motifs more or less evenly. There should be 7 motifs in height, and 19 (21, 23, 25, 27, 29) motifs in width.

Using gray-beige yarn from the wrong side, using a SC behind the back wall, connect the squares into horizontal stripes: 2 motifs in height and 19 (21. 23. 25, 27, 29) motifs in width. Add the next rows of squares one by one until the panel reaches 7 stripes in height.

With the right side of the canvas facing you, connect the stripes together vertically to define vertical lines and make the motifs stand out.

Then tie the knitted panel with 2 circular rows of stitches, performing 3 stitches for each corner of the rectangle.

In the 3rd circular row from PS With on the front side in the upper right corner, knit a button loop like this: PS in a corner stitch, 5 VP, PS in the same stitch, then knit a PS to the next upper corner, tie a button loop in it in the same way, and finish tying the skirt with 1 PS . Cut and secure the thread.

Final processing: To make the squares flat, place the cloth in slightly warm water and wet it thoroughly. Squeeze out excess water. Lay the panel on a towel and stretch it thoroughly until the rectangle is the desired size. You can secure the knitted fabric to a mattress or ironing board before drying with pins. Dry naturally. Then attach the skirt to yourself and mark the places for sewing on the buttons. Sew on 2 buttons.