How to seal a cracked nail at home. Oh Gods, my nail broke! Don't panic, the ambulance will fix everything! Nail repair with silk for gel polish

From this article you will learn:

What are the main causes of brittle nails?
What to do if a nail breaks under gel polish, a nail extended with acrylic, or a natural nail
What to do if a nail breaks in the center, on the side, at the root
How to repair a broken nail yourself using a tea bag and special glue
How to temporarily restore a broken nail before visiting a specialist
What are salon methods for restoring a broken nail?
What are the main measures to prevent brittle nails?

Neat nails of suitable length are a real decoration of women’s hands. Therefore, a beautiful manicure is rightfully considered one of the main components of an impeccable image. But none of us is immune from possible troubles, and the strongest nails can also “let down” the hostess by breaking right before an important event. However, there is no need to be upset in advance, because the problem can be easily fixed. In the article we will tell you what to do if your nail is broken, and we will also understand what can provoke such situations and how to prevent them.

The main causes of brittle nails

If you always want to have beautiful and strong nails, it is important to know what can cause nail plates to become brittle and weakened.

Most often, nails begin to break for the following reasons:

1. Lack of vitamins, trace elements and minerals designed to maintain health and beauty. A sufficient amount of these substances in the body is synonymous with healthy and strong nails.

Therefore, the first thing to do if your nails break quite often is to reconsider your diet.

Foods rich in vitamins and microelements for healthy nails:

seafood;

milk and other dairy products;

nuts and sesame;

seaweed;

zucchini, cucumbers;

fatty fish;

vegetable juices;

basil, parsley, cilantro and other greens;

pumpkin seeds.

2. Improper care. Most of the cosmetics that we use to take care of our hands and nails every day contain acetone and formaldehyde. Due to contact with these substances, natural nail plates weaken, lose their natural hardness, and become brittle. Detergents and poor quality water cause no less harm to them.

Taking good care is the second thing that is important to do if your nails begin to break. There are a huge number of wellness procedures, most of which you can do yourself. For example: baths with oils, masks, special varnishes to strengthen the plates, various folk methods.

All of the above helps improve the condition of the nail plates. However, it is equally important to know what to do if the nail has already broken. We'll talk about this later.

What to do if your nail is broken, and what not to do

The mechanism of the procedure for breaking a nail will depend on how severely the nail plate was injured. First, let's list the most common types of damage:

Lateral detachments without injury to the bed;

Breakage of the nail plate at the very “root”;

Cracks with damage to the bed;

Injury with a detachment of the plate and damage to the skin under the nail.

The last option is the most unpleasant and painful.

A broken nail brings a lot of problems to girls: an unaesthetic appearance of their hands, snags on their favorite clothes, scratches on the skin. “First aid” will depend on how badly the nail was damaged.

Actions to take as soon as a nail breaks:

cut or file a plate;

glue the broken part of the nail;

resort to the services of a manicurist.

What to do at home if your nail is broken, but you want to keep your manicure? The damaged area can be glued together. The technology of this process will depend on where the nail plate was broken: in the overhanging part of the nail or in its center. Additionally, the size of the fracture is taken into account.

A small crack can be sealed with a patch made of natural fabric or a paper plaster. This method will work if the fracture occurs on the side of the plate, along the “smile” itself or along it.

If the free edge of the nail is completely broken, then a tip (a special acrylic product) is applied on top.

The tip is also used if the nail is broken along the axis of the finger.

You can solve the problem for a long time only if your nail is broken no more than 1/3 of the entire free edge.

When asked what to do if your nail is very broken, we recommend turning to the services of a manicurist. A deep break with damaged skin under the nail is very difficult to fix on your own.

What not to do if your nail is broken:

Squeeze glue onto natural surfaces not protected by varnish.

Apply your natural nail to glue. Aggressive chemicals corrode the natural plate. This method can only be used in case of extended nails.

If the nail is broken “to the meat”, you cannot wet it in acetone or other compounds. Aggressive substances will cause severe irritation and inflammation of the open wound.

There is no need to put off restoring the plate. Usually cracks grow quite quickly, and the broken part can come off completely. Then it will be more difficult to correct the situation.

What tools are needed to repair a broken nail?

Restorative procedures should be started as early as possible, as the fracture may increase. Necessary equipment:

Disinfectant. It is better to use something whose action is aimed not only at degreasing the plate and removing contaminants, but also at eliminating excess moisture. At the same time, the nail should not dry out.

Special fabrics. To restore the plate, you can purchase natural fabric (silk, linen) or artificial fabric (fiberglass). The most convenient options are silk and fiberglass. They are sold in strips or individual samples according to nail sizes.

Special nail glue, whose composition should be safe for nail plates. This restoration adhesive is quick-drying.

Nail files and buffs. The tool you will use to repair a broken nail must have an abrasiveness of at least 240 grit. Buff is a special polishing file. If you use a cloth, a buff will be very convenient for smoothing the surface of the nail plate.

To perform high-quality restoration procedures, we advise you to purchase a set with all the described devices. This way you will save your time and finances.

What to do if your nail breaks under gel polish

The first thing to do if a nail under gel polish breaks is to remove the coating. It is enough to remove the varnish only from the broken plate. Depending on the type of coating you have, use shellac or biogel remover. If you can't get rid of the old varnish, you can make a patch over it.

The patch is applied to the gel polish in the same way as to a natural plate. Next, the sealed area is covered with a new layer of varnish and dried in a UV lamp.

If the nail is broken along the edge, then the broken part can be cut off and extended with biogel. Take a piece of foil and place it under your nail. It will serve as a “support” for the gel polish. Dry the nail in a UV lamp and carefully remove the foil.

What to do if a nail extended with acrylic breaks?

Restoration should be done with acrylic tips. These are artificial devices, so the use of synthetic glue (“Moment”) will be harmless. You can use filter paper, silk strips or paper plaster as fastening patches.

What to do if a nail extended with acrylic breaks:

If the damage is too severe, you can re-grow the nail.

Apply glue to the plate and attach a paper strip.

Apply a second layer of glue, and after it dries, apply a third.

The next step is polishing the plate with a nail file.

Apply new varnish.

A simpler option is to replace the damaged acrylic tip with a new one.

What to do if your natural nail breaks

Usually a fracture of the nail plate forms directly along the “smile”. Restoration will preserve your manicure, but the nail will lose strength.

What to do if your natural nail breaks:

Remove the varnish and wipe the plate with an antiseptic.

Polish the bumps on the surface of the nail with a special buff file.

Make a patch. The piece of fabric should be 2-3 mm larger than the break (from each edge).

Lubricate the coating with glue and place the fabric. To evenly distribute the patch, you can use the sharp tip of a toothpick.

After the glue has dried, treat the nail with a polishing buff file.

Depending on the degree of damage, apply another 1-2 layers of fabric.

The final stage is coating the plate with varnish.

If your nail is broken, you need to choose the right way to solve the problem.

What to do if your nail is broken in the center

In this case, you will need a tip. Blank products must be square and transparent in color.

What to do if your nail breaks in the middle:

Use a polishing file to smooth out any uneven edges of the nail.

Wipe your nail with nail polish remover.

Cover its surface with special glue, and do the same with the inside of the tip.

Place the tip on your nail so that the edges of the product and the nail match.

Wait until the glue dries completely.

Adjust the shape of the tips to match the look of the rest of your nails, leaving a small margin.

Shape the nail, align the plate (it should coincide with the edge of the tip). Seal the joint.

What to do if your nail breaks on the side

Now let's figure out what to do if the nail breaks on the side:

As in previous cases, you first need to wipe the nail with a disinfectant solution. Then polish the crack until you have a smooth surface.

Prepare a fabric patch.

You need to make two stripes. The first piece should be slightly larger than the break; this will be the first layer. The second one should match the width of the nail; it is used as a second layer.

Now let's move on to the restorative procedure that needs to be done if the nail is broken. To fix the fabric on the plate, it is pre-lubricated with glue. You can straighten the material with the sharp tip of a toothpick. The fixed strip of fabric is covered with glue. After it dries, carefully polish the surface.

The same needs to be done with the fabric that we prepared for the second layer. After this procedure, treat the nail with a buff. Restored, it will retain its appearance until the plate grows up.

What to do if the nail is broken at the root

The most unpleasant situation for lovers of flawless nails is a severe fracture of the nail plate. Let's look at what to do if the nail breaks at the root. The first step is to thoroughly blot it in a disinfectant. Hydrogen peroxide, chlorhexidine, miramistin, etc. are suitable. Such a nail is very difficult to restore. Therefore, we advise you to contact a manicurist.

The procedure can be done only after the wound on the skin under the nail has healed.

In salons, this manipulation is done using special biogels. These coatings contain proteins that restore the nail plate. Biogels also protect cracked nails from infection.

Many biogels dissolve when interacting with detergents and acetone. To keep your manicure intact, it is better to wear rubber gloves when washing dishes or cleaning.

How to restore a nail plate after a broken nail at the root

Remove the broken nail.

The first thing to do if the nail is broken at the root is to completely remove the broken part of the plate. This is necessary to heal a wound on the skin. It is more convenient to cut off the broken edge with nail scissors. If you need to lift the broken part, use tweezers.

After removing the broken nail, it will become more convenient to treat damaged skin. This will avoid infection and further inflammation. The remaining part of the broken nail can be left, but in this case the treatment will be more difficult. The deformed edge will separate as the plate grows.

Stop the bleeding.

The next thing to do if the nail breaks at the root and causes the formation of a bleeding wound is to stop the bleeding. Apply a piece of bandage or disc to the wound, press firmly on it, and hold for several minutes.

Trim off the rest of the nail.

If the injury causes very severe pain, then a specialist should restore the nail.

Soak your foot or hand in cold water.

After trimming the broken edge of the nail, soak your finger in cold water for 20 minutes.

Choose a temperature of the liquid that would help to gradually reduce pain. This procedure helps normalize blood flow to the limb.

Soak your hand or foot in salt water.

Now place your hand in a previously prepared bowl of warm salted water (the solution should contain 1 teaspoon of salt and 4 cups of clean water).

Keep your finger in the solution for 20 minutes. Liquid with added salt prevents infection. This procedure should be done 2-3 times a day for the first three days after the injury. Dry your finger with a cotton cloth.

Use antibiotic ointment.

To restore damaged skin faster, gently wipe the wound with antibiotic ointment.

Your hands must be clean throughout the entire procedure.

Apply gauze to the nail bed until the plate grows back.

This must be done so that the nail broken at the root does not cling to things. Gauze will also protect the nail plate from infection.

Repeat the procedure until the plate grows back. The gauze must be changed with each subsequent wound treatment. The damaged area must be dry. If the bandage gets wet, it should be replaced.

Monitor the condition of the wound.

During the first time after injury, care must be taken to ensure that no infection gets into the wound. This is especially true in the first 72 hours after injury.

Signs of infection: fever, inflammation, heat in the wound area, pain, swelling or suppuration.
Monitor the condition of the wound until a new healthy nail grows. If you realize that you have an infection, go to the doctor immediately.

How to repair a broken nail yourself using a tea bag

A tea bag, a nail file, and superglue are all you need when you need to “fix” a broken nail. What can I do to restore my manicure using these items?

Procedure:

Remove the tea from the bag. Cut a small strip out of it in the shape of a rectangle. It should be slightly larger than the break.

Treat the nail with a polishing file until a smooth surface is obtained.

Apply a small layer of superglue to the cut strip. Place it on your nail and apply another layer of glue on top. After this glue has hardened, apply a third layer. The protruding ends of the paper can be trimmed using nail scissors.

Treat the nail with a polisher, remove the glue with acetone or an alcohol solution. Finally, coat your nails with clear polish.

How to repair a broken nail yourself using special glue

A good remedy is a special glue for broken nails. Let's consider what to do if you want to correct the situation with its help.

The first step is to wash your hands thoroughly to remove any greasy residue from creams and oils. Dry your fingers well with a towel.

Preheat the water in advance. Dip the broken nail into it. This must be done to prevent the plate from hardening. If the nail is only broken without coming off completely, then this procedure can be skipped.

Apply a small amount of glue to your nail. It is convenient to distribute it over the plate using a toothpick or the sharp tip of an orange stick.

In manicure supply stores you can purchase special glue for restoring damaged plates. But if you cannot do this at the moment, you can use regular superglue. Try to do everything carefully so that the product does not get on your skin.

Now let's proceed to the main procedure that needs to be done if the nail is broken. To fix the deformed area on the plate, apply it and hold it there for one minute. This will be enough to ensure that the nail plate is well secured.

Next, remove excess layers of glue with a cotton pad soaked in nail polish remover. This must be done as soon as possible so that the glue does not have time to dry. This is necessary to ensure that unnecessary irregularities do not form on the plate.

Once the glue is completely dry, polish the plate with a fine-grained polishing file. You should get a flat, smooth surface. An important rule when working with a nail file: guide the tool in one direction only. This will avoid even more damage to the nail plate.

At the end of the procedure, apply a protective coating (varnish) to the nail. Now wait until the composition dries. The restoration is complete!

The first thing to do if you have a broken nail is to assess the extent of the damage. If it is insignificant, then you can carry out the restorative procedure yourself. However, if you are faced with an extensive injury that is accompanied by severe pain or even bleeding, then it is better to go to a specialist.

Many girls get their manicures done by the same master, who has proven his professionalism with quality work. But if you have a broken nail and require immediate intervention from a specialist, you will probably have to wait, since the influx of visitors is usually very large.

A method of temporarily restoring a broken nail before visiting a specialist

You will need a narrow roll of tape. Cut a small strip, it should be slightly larger than your nail. This can be done carefully using nail scissors or regular scissors. If you only have large scissors on hand, use the ends.

For the procedure you need to take single-sided tape. Transparent adhesive tape for gift paper, multifunctional adhesive or any other type, but always transparent, will also work. Make sure that its adhesive power is not too strong. In our case, it is worth excluding electrical tape.

Now let's proceed to the main procedure that needs to be done if the nail is broken. To restore the damaged area, stick the prepared piece of tape onto the nail plate. You need to try to make sure that the middle of the gluing surface is above the break itself.

Press on the damaged area and hold it there for a while. Carefully place the tape on both sides of the plate; it should completely cover the nail.

Before covering the nail plate with tape, you need to check that its broken halves meet.

Press down on the taped area to better secure the tape.

To avoid causing even greater damage, straighten the tape in the direction of the crack.

Cut off any excess tape. This is convenient to do with nail scissors. If the tool is not at hand, use the ends of large scissors.

The edge of the tape should be very tightly attached to the nail.

The described method is exactly what you need to do if your nail is broken and a trip to the nail technician is not coming soon. A specialist will eliminate the problem using more effective methods.

Salon methods for restoring a broken nail

If your nail is broken, it is better to contact a specialist. Almost any nail salon provides nail restoration services.

Sealing.

Sealing with wax is usually done in the following sequence:

plate design;

grinding;

removal of contaminants;

waxing the nail;

lubricating the plate with nutritious oils.

Important! Varnishing should be done no earlier than 20 minutes after the procedure. Afterwards you need to wash your hands well.

Sealing is a restorative procedure. If your nail is broken, we recommend having it done to improve the condition of the nail plate.

This process is also useful for treating nails after extensions; in addition, it helps to “revive” the plate after contact with household chemicals.

The effect of the procedure lasts for several days. Re-sealing can be done after the film is completely erased.

Reinforcement with fabric or paper.

This procedure is usually used to fix a nail that has already broken. But we will consider its use to strengthen the nail plate.

Procedure:

polish the nail;

apply glue or clear varnish to it;

stick a piece of fabric;

bend it under the plate;

apply a fixative;

Keep the “structure” for 3-4 days, you can apply varnish on top of it.

If you want to reinforce it with paper, then you should not apply varnish. This manicure will not look attractive. In this case, the varnish takes a very long time to dry.

Instead of a conclusion: basic measures to prevent brittle nails

What to do to prevent your nails from breaking? If you often encounter this problem, we advise you to pay attention to the prevention of brittle nail plates.

The following rules must be observed:

Contact a specialist on time without delaying the problem.

It is important to take proper care: make high-quality coatings, baths, use strengthening oils, and cuticle moisturizers.

Drink enough water. Dehydration of the body provokes brittleness and splitting of nails.

It is better to do cleaning with gloves to prevent nails from coming into contact with harmful chemicals.

Protect your nails from mechanical stress.

Your nail polish remover should not contain acetone.

It is worth doing nail treatment, following these recommendations: hold the file at a right angle, do not tear it off, but carefully cut off the burrs, purchase glass or ceramic tools.

Before your next manicure, you need to give your nails a rest.

Sleep schedule (at least 8 hours) and nutrition. Eat more foods containing vitamins A, E, D, as well as calcium, phosphorus and other important elements.

What else should you do if your nails often break? We advise you to pay attention to those methods that can be used at home. Here you don't need expensive cosmetic formulations. Can be used:

sea salt. Surely you have noticed that after a trip to the sea, your nails become stronger and take on a healthy appearance? Indeed, sea salt has a strong strengthening effect on the nail plates. It can be bought at a pharmacy.

Iodine. To strengthen the nail plates, apply it with a regular cotton swab. Then lubricate your nails with cream. A varnish coating can be applied over the iodine.

Healing wax. Eliminates dry nails, which sometimes causes brittleness, so this procedure is very useful. Regular paraffin will not work here.

Clay. Clay wraps nourish marigolds well. After wrapping, apply moisturizer to your nails.

Essential oils. The greatest effect is achieved after procedures with coniferous and citrus fruits. Many oils have an antibacterial effect.

Where to buy high-quality and professional nail files for damaged nails

Among the huge number of online stores offering manicure accessories, we invite you to our “WORLD OF NAILS”! You should choose our services because:

“MIR FILOK” – own production of nail files.
"WORLD OF FILES" is the main supplier!
The showroom of the company "MIR FILOK" is located in Moscow.
Delivery throughout our vast Motherland!

Why is “WORLD OF FILES” the best option for purchasing a product for you?

Our store is built on our own saw blade production. Thanks to this, you get: minimized cost of service, tested and confirmed product quality, fast production, attractive conditions for distributors.
Our nail file is made only from materials that have repeatedly proven their quality (South Korea).
Wide variety of product. Thus, a manicurist with any level of professionalism will be able to satisfy his interests.
You can figure out which file is right for you. We carry out individual orders.
Another advantage is the application of your brand logo on the working surface of the files.

Nature of the break – crack

1 repair method - using acrylic powder

Necessary materials: and acrylic powder.

Stage 1. We prepare the nail plate for gel polish, carefully following the technology:

Stage 2. Cover the nail with a base (it’s better if it’s rubber). Lift the nail at the crack so that the base fills it a little, that is, gets inside the crack. Using a thin brush, apply the base on the back of the nail in the problem area. Without drying, pour acrylic powder here, just a little bit. Let's dry it.

Stage 3. Shake off excess powder. We file the nail, leveling it from above and from the side. Apply another layer of base and dry.

If gel polish coating is not intended, then it can be used instead of a base, but this will save the situation for only a short time. Once upon a time I wrote about using it.

Repair method 2 - using silk

Necessary materials: silk or fiberglass (reinforcing tape).

Step 1. Preparation of the nail plate according to all the rules (for details, see the previous section).

Step 2. Cut out a piece of silk slightly larger than the size of the crack. We apply the base and, without drying it, put fiberglass on it and saturate it with the base. Dry it in a lamp.

Step 3. Cover the nail with another layer of base. For greater reliability, you can use, for example, .

Step 4. We file if the silk or material protrudes slightly beyond the edges of the nail plate.

Alternative crack repair option

Some craftsmen believe that the only way to reliably “neutralize” a crack is to cut it out. Like this? - you ask. To do this, an incision is made with manicure scissors, perpendicular to the crack so that there are no traces of it left in the depth of the nail. It turns out that in the free edge on the side there is such a triangular wasteland, which then needs to be filled.

However, you first need to file it down to avoid any unevenness and apply primer.

You can fill it out in different ways:

As with extensions, substituting a form and filling it with gel or a mixture of rubber base and acrylic. After drying, adjust the shape.
If the triangle is not very large and the base is thick, then you can do it without substituting the shape, but most likely you will have to apply it in several layers and then cut it out, including from below, but here you cannot do without.
Using fiberglass: first strengthen it from above with a base, dry it, and then from below, also dry it and adjust the shape.

As I said, this is already difficult to do at home, unless, of course, you yourself are a master!

Lifehack

Well, here I can’t help but mention what can replace fiberglass, because it is also not always at hand. But, for example, tea bag I think almost everyone has one. Then cut a patch of the required size from it - budget-friendly and very practical. Well, the second option - you can also use for these purposes lint-free cloth or cotton wool.

Nature of the break - chipped

Now consider the option when the corner of the nail is broken. There is nothing left to do but to extend the broken nail, but the advantage is that for small chips (up to 3 millimeters), this can be done with a base, although I won’t say that it will be very reliable, but it will save aesthetics for a while.

Repair method 1 - base extension

Necessary materials: thick rubber base and .

Stage 1. Preparation of the nail plate using technology.

Stage 2. Substitution of the extension form. Adjust it so that it fits well under the chip.

Stage 3. Apply base to the entire surface of the nail and to the chipped area, enough to even out the shape of the nail. We polymerize in a lamp.

Stage 4. Apply the base only to the chipped area to compact it, make it even with the nail and make it stronger. Let's dry it.

Stage 5. We correct the shape with a file and apply another leveling layer of base and dry it in a lamp.

Repair method 2 – gel manicure

Necessary materials: base gel, fiberglass.

Step 1. Preparation of the nail plate with de-glossing and removal of pterygium, degreasing and applying a layer of primer.

Step 2. The base gel is applied to the entire surface of the nail. Without drying, a piece of fiberglass cut to size is placed on the chip. Next, it is, as it were, saturated with this gel, the excess silk is cut off, and now into the lamp.

Step 3. A second layer of base is applied, with special emphasis on the area where the nail is chipped and where it meets the fiberglass. Into the lamp.

Step 4. We correct the shape with a file.

Then you can perform standard coating. But if you want maximum reliability, then it is better to apply another layer of sculpting gel, and only after that adjust the shape with a file. In this case, there is no need to apply a base for gel polish.

For masters, I advise you to watch how Larisa Ilyina (trainer of the Nano Proffesional company) does it:

Publication from Larisa Ilyina Nanoprof (@larisa_ilina80) Sep 17, 2017 at 9:28 PDT

I hope that this voluminous material did not confuse you even more, but gave answers to the question of how to repair a broken nail with gel polish. I also want to believe that this information will be useful both for girls for repairing nails at home, and for masters who come to them with such problems. And now that’s all, bye-bye!

If you found this page useful, please recommend it to your friends:

It's simple. Here's how it works: a tea bag is made of thin fibrous paper, when this paper is applied to the nail plate, it carefully and almost imperceptibly hides all the cracks and breaks, as if merging with the nail. It works no worse than salon methods for gluing the nail together using a silk coating. A tea bag will save even the weakest and seemingly hopelessly broken nail.

To fix a broken nail, you will need:

Cellulose tea bag
A good base coat - such as NailKale Superfood Base Coat
Scissors
Quality nail file for nail shaping and polishing polishing finish
Colored varnish
Topcoat - such as Sally Hansen Insta-Dri

How to fix a broken nail using a tea bag

Make sure that the polish is removed from the broken nail, as well as all oil and cream cuticle products.

Cut the tea bag and empty it of tea. Cut a rectangle from cellulose in the shape of your nail. The paper should not cover the entire nail plate - the main thing is to seal the break and crack with it.

Apply the base to the nail, wait until it dries a little, then cover half of the nail with a rectangle, smooth it out well so that there are no uneven spots or bubbles. Cover the nail with another layer of base. When this coating is dry, use a nail file to remove excess parts of the tea bag from the edge of the nail plate.

Ta-dam! And this is what your new nail will look like after repair.

You can repair a broken nail using paper, silk, linen, powder, or artificial fabric covering - fiberglass. Or you can use modeling materials. For example, acrylic, gel. They are used both as protection applied on top of the “patch” and as an independent type of repair. With the help of the listed materials, repair of a broken nail will be performed as quickly and comfortably as possible.

Which method should I choose?

When choosing, take into account:

crack size;
what part of the nail is broken;
is there a break?

Any procedure begins with disinfection of the hands of the master and client. Then you need to remove the remaining varnish, degrease the nail, treat the desired area with a file, sanding the edge of the break. The grinding process is necessary for better adhesion of the material to the nail surface.

For small cracks, silk is most often used. In this case, a kind of “patch” made of a small piece of silk is placed on the crack. It is held in place by special glue.

If a more global restoration is necessary, it is recommended acrylic nail repair. First, glue is applied to hold the broken area together. On top of it is acrylic powder. They react with each other, the powder becomes hard, forming a dense layer on the surface of the nail plate. The hardened material must first be sanded with a file, and only then the coating must be applied.

By the way, gel nail repair is also done quite often. Biogels with high elasticity have recently been in particular demand. The procedure for restoring a nail in this way is very simple, but in this case you will need a UV lamp to dry the biogel on the nail.

Each process described has its own tricks, so you can’t do it without the experienced hands of a master.

How long will a repaired nail last?

A nail that has undergone restoration will delight its owner for 3-7 days. Acrylic and gel last longer, silk - a little less. The procedure can and should be repeated regularly until the broken area has completely grown back. Nail repair usually takes up to 10 minutes.