Festive Portal - Festival

Knitting pattern for a winter beret. Knitting for spring, summer and autumn for women: patterns and description. How to knit a voluminous beret, Gerda, braids, openwork, fans, with leaves, Nako, braided, pumpkin with knitting needles for a woman? Classic option for

The beret is a universal accessory that can be worn not only by women, but also by children and men with excellent taste in fashion. In this article we will present several master classes, how to knit a beret for beginners.

The beret is a very beautiful accessory that did not immediately gain popularity. First, berets appeared - flat hats, and they were worn by representatives of the clergy.

At the end of the 16th century, berets began to be worn in Italy, but no longer by priests, but by people related to the leadership of the country and military affairs. At the end of the same century, berets acquired their modern look. They were worn exclusively by men. Only at the end of the 18th century did they come into use as women's accessories.

At first they were made of fabric, mainly felt or velor. Nowadays, needlewomen have learned to crochet and knit them from different types of yarn. We will describe several techniques for making beautiful berets in this article.

You can very simply crochet a beautiful and fashionable beret in just one evening. First, you need to decide what the future beret should be - warm or light. If you want to make a winter headdress, then you need to use wool or half-woolen threads, and if you want to make a winter headdress, then cotton or silk.

When choosing a hook, pay attention to the recommendations indicated on the yarn packaging. Typically, manufacturers write what tools need to be used to work with a certain type of thread.

Having prepared the basic materials for knitting, you can begin making the accessory. To do this, check out our master classes on how to crochet a beret.

How to knit a simple beret?

To knit such a beret, you need to know the basics of crocheting, namely:

  • How to make air loops
  • How to make half columns
  • How to make double crochets and single crochets

Here is the detailed one diagram and description of the beret knitting process:

  1. We make 5-6 air loops and connect them into a ring
  2. The resulting ring must be tied with single crochets (their number should correspond to the size of the ring of air loops)
  3. Next, we knit the beret in a spiral as shown in the diagram below:

How to knit a voluminous beret?

  1. First, a chain of 6 air loops is knitted;
  2. The chain is enclosed in a ring using a connecting post;
  3. Proceed to knitting circular rows in half-columns (each row should begin with a chain loop and end with a half-column) according to the pattern:

How to crochet a warm beret?

To make a winter beret for women, a circular pattern of 12 rows is used:

  1. Making 9 half-columns
  2. We alternate two half-columns with four air loops
  3. The scheme is the same
  4. We make 1 half-stitch in each loop of the top row
  5. Repeat the pattern of the previous row
  6. The scheme is the same
  7. The scheme is the same
  8. Alternate 1 half stitch with two air loops
  9. We repeat the scheme of row No. 5
  10. The scheme is the same
  11. We knit with a “crawfish step” as shown in the diagram below:

Crochet berets for women: models for spring and autumn

Many girls wear berets not only to keep them warm, but also to complement their look. We present to you patterns for crocheting an openwork white beret that will suit any spring and autumn outfit:

This version of the beret can be worn even in summer under a denim suit. According to the pattern, you can knit berets for children of the same cut:

Knitted beret: patterns

Any knitted beret will consist of three main parts:

  • Crowns (this is the part you need to start with) knit a winter beret with knitting needles)
  • Headband
  • The main part - here you can use knitting of some kind of pattern

Try it tie the beret with braids. They will visually slightly increase the volume of the headdress, even if you use thin yarn rather than wool or mohair:

In order for the beret to fit, you need to immediately take measurements of the head of the person who will wear it (you need to measure the circumference of the head and the depth of the beret - from the ear to the top of the head).

As an example, we will tell you how knit mohair beret knitting needles:

  1. Knit 11 loops.
  2. In the first row, all stitches must be purled.
  3. In the second row, the first loop is the front one. It must be alternated until the end of the row with an additional loop.
  4. In the third row you need to knit two purl loops, two knit stitches - and so on until the end of the row.
  5. In the fourth row, we begin to knit an exquisite pattern in the form of such an openwork, as shown in the diagram:

  1. After the pattern you can continue knit beret with an elastic band - You can use either American or French elastic:

Knitted beret: models

They look very fashionable knitted beret models for women spiral. We are talking about such beautiful headdresses:

Berets with the “Corn” pattern look no less interesting. He is also called "Hedgehog".

Berets with openwork paths also look original. Of course, you can’t wear it in winter, but it’s suitable for autumn and spring. A detailed pattern for knitting a beret is presented below:

No matter how you decide to tie your beret, in any case it will look feminine, original and very fashionable. We hope that the master classes given in this article will help you understand the basics of crocheting and knitting berets so that you can create beautiful items not only for yourself, but also for all members of your family.

Video: How to knit a beret with knitting needles?

If you know how to hold your knitting needles correctly and have already knitted at least a little, then you can easily knit an exclusive beret. Since you tie him, no one else will tie him. What this requires, first of all, is to find a pattern and description for beginner knitters of the desired beret. If you are knitting a pattern for the first time, it is better to try it on a sample first.

For beginner craftswomen, smooth threads are suitable so that there are fewer tangles and without much lint. Read the description of the pattern more carefully and buy the right size knitting needles.

Simple beret tied with an English elastic band

Knitted headdress with knitting needles with an English rib pattern

This beret took 100 grams (500 m per skein) of Turkish yarn. The number of knitting needles depends on how thick the thread is; if the thread is thin, then knitting needles No. 2 are for the side and No. 3.5 for the base.

If the thread is thicker, then the number of knitting needles should be larger.

We cast on an average of 140 stitches on the knitting needles and knit a 3 cm border. The side can be knitted with a simple elastic band, one knit and one purl.

We knit a beret with the “English elastic” pattern

This knitting looks beautiful and impressive. The first row is knitted 1 p. knit, 1 p. purl. 2nd row: knit one loop, then make a straight yarn over and remove the purl loop without knitting.
Third row: knit the loop that turned out to be yarn over with a knit stitch, and on the wrong side, also make a yarn over without knitting it.

Using an English elastic band, we increase the loops by half and the beret takes on volume. The base of the beret itself needs to be knitted on average 10-15 cm.

For the first row we knit all the loops in twos, alternating knit and purl.

We knit the second row in the same way, two at a time, depending on how the loops look, if the loop is a knit stitch, then we knit a knit stitch, and, accordingly, a purl loop in the same way.

We continue to knit like this until there are fifteen loops left on the knitting needles. Pull the thread through the remaining loops and pull, using the end of the thread to sew the beret. We decorate the finished creation with beads if desired.


 Carefully sew the side seam with a needle - watch the front side, the thread should not be visible

Beret with scarf

For such a set you will need 400 grams of Arina yarn. You can choose colors and shades at your discretion. It is advisable to knit such a beret using knitting needles number 3 and 5.

Rubber

The elastic is knitted with an odd set of stitches. We knit alternately one purl loop and one knit loop. If the knitting is not circular, then the first loop on the knitting needles is removed unknitted.

Garter stitch: This stitch is called because it is knitted only with knit stitches on one side and the other.

Description of how to knit a beret

On knitting needles number 3 we cast on 9 loops, knit a headband so that it fits tightly around the head, this is about 50 cm. You should have a knitted strip. On the horizontal side we put loops on the knitting needles, take threads of a different color, and knit one row with facial loops. Next we knit a row, adding a loop (yarn over) through each one. Everything is knitted in garter stitch, the color of the threads can be changed at your discretion and desire. Having knitted 35 rows, decrease every third and fourth stitch, then knit three rows without decreasing. Next we knit all the rows, reducing each loop. When there are 8 loops left, we collect them on a thread and tighten the beret and sew the side with thread.

Bright headdress with a chess pattern

It is not difficult to knit such a beret. We will need knitting needles number 3.5, a set of circular knitting needles number 4, a large bead and melange yarn 100 g.

The elastic is knitted 2 knit stitches, 2 purl stitches alternately. Garter stitch is knitted in knit stitches on all rows. The stockinette stitch is knitted, the front rows are knitted with knit stitches, the purl rows are knitted with purl stitches. The checkerboard pattern is knitted in 10 stitches. 5 knit stitches, 5 purl stitches, knit 5 rows. Then change the purls to the front ones and vice versa.

We put 84 loops on the knitting needles, 21 loops on one knitting needle and fasten them into a circle. After knitting 12 circles of elastic, double the loops by knitting two knit stitches from one loop. You should get 168 loops. To get an even checkerboard pattern, add two more loops and knit 50 circles with this pattern. After this, start starting, to do this we knit with stockinette stitch, while grabbing two loops at a time until there are 6 of them left. Pull the remaining threads together and fasten.

You can knit a pompom from threads and sew it to the top of the beret and decorate it with a bead.

See how to knit the English rib pattern, which is used in knitting a beret:

Let's talk about knitted berets for women.

  1. If you have never knitted, then you may have a question, why do you need to knit a beret if you can easily and simply buy it in a store? We will answer - you can knit a beret with your own hands from expensive and high-quality yarn. This, however, will not take much time, but you will have a soft, warm, beautiful beret for little money. For example, threads that include silk, cashmere, expensive wool for a beret will cost 500 rubles. But try to buy a high-quality one for 500 rubles beret!? You won't succeed. How to find a form that suits you? Yes, even more difficult. Therefore, knitted hats are very popular among our readers.
  2. You have been knitting for a long time, the knitting needles are simply “burning” in your hands, then it will not be difficult for you to take any suitable pattern and knit a new beautiful beret for your beloved. Moreover, you only need a little thread for a beret: 1 or 2 skeins. Our selection of knitted berets for women is just for you.
  3. If you are just learning to knit, you most likely think that tying a beret is very difficult. But you are wrong. There are very simple patterns for knitting berets, both in the round and on two knitting needles.
  • Choose a video lesson on knitting a beret that is understandable to you.
  • Make sure that when knitting, you use thicker knitting needles (No. 5-6), as well as yarn. Thick knitting needles knit faster and are easy to unravel and redo in case of a mistake.
  • Take the threads well twisted so that they do not fall apart.
  • Knit in the simplest patterns: rib stitch, stockinette stitch or purl stitch.
  • Be patient! The simplest berets are knitted in 1 day!

Now look at our selection and choose a new beret for the woman you love.

Takes with knitting needles for women, models from our website

Beautiful, warm, openwork and soft berets are knitted by our readers.

interesting selection for the site 20 children's berets

Hello girls! I got Lydia PS color Pervanche. The color, in my opinion, is neither here nor there.. well, nothing came to mind. And the color doesn't suit me. I also don’t like to knit with unattractive threads. I thought and wondered, and knitted my daughter two snoods and two berets - one warm, the other thin. They fit very well with the jackets and the weather, and my daughter liked them too, and I subsequently stopped paying attention to the color, which I initially didn’t like so much.

I knit snoods narrow, but with two turns I like them better and don’t look narrow. This is how the “Dancing Leaves” set and the “Myra” set were born.

By the way, if I am knitting a beret NOT from the top of the head, I crochet a chain with the main threads and measure the circumference of the head with it, then I calculate the pattern based on the given number of loops and lift the loops from the braid onto the knitting needle. Honestly, it’s more convenient for me. I don’t even look at the description, where they write “cast on 225 stitches”, this doesn’t mean anything to me personally, since I never knit from the yarn indicated in the description))) Work by Irene IVAS.

Description and pattern of knitting a beret for women

Beret and scarf knitted for women



Works by Elena Vladimirovna. The set is very warm, the wool is soft and not scratchy at all, knitted with needles No. 2 in one thread.

“Double” beret for women with lining.

Description of a knitted beret for women

Cast on 120 stitches (10 repeats) and knit according to the pattern in turning rows on circular knitting needles.

Purl r. – purl loop. When the pattern is completed, there will be 60 stitches left in the pattern.

Option 2: on the remaining 60 loops in the river. knit all loops 2 stitches together. Knit the next row. Then knit 2 stitches together again. = 15 p. Break the thread, pull it through the remaining loops and fasten. Cast on 110 loops, distributing them evenly on the base of the beret and knit the lining with stockinette stitch (knit rows - knit stitches; purl rows - purl loops), first adding and then subtracting the approximate number of loops in the pattern. Connect the seams of the beret and lining separately. Crochet the edge of the beret to create a “rim”.

Description of the scarf:

Cast on 64 stitches and knit according to the pattern. Diagram showing All rows are in the pattern on the front side. On each side at the beginning and end of the work, knit 4 loops in stockinette stitch. Knit half, repeating the pattern 3-4 times. Set aside the work and begin knitting the second part in the same way. Connect both finished parts in the middle. See the description of the scarf for more details.

Scarf knitting pattern:

Knitted beret for women

Hello girls! Hats are always a problem for me. No matter what hat I knit, it doesn’t seem to fit. I’ve already put on about ten of them, but I don’t wear them. No matter what I wear, it all seems not mine. I knitted a couple more and again something was wrong. Maybe I’m not used to it yet... The beret is knitted from “Excellence” yarn (50% wool, 50% acrylic). It took one skein (220m in 100g), knitting needles No. 2.5. Knitting needles No. 2.5. Work by Marina Efimenko.

Description of a knitted beret for women

Size: S/M – M/L.

The length of the beret is approximately 24 cm.
You will need: 100 - 150 g of DROPS NEPAL yarn from Garnstudio (75 m / 50 g, 65% wool, 35% alpaca), color 0100 eco; bidirectional and circular knitting needles (40 cm) 5 mm; circular knitting needles (40 cm) 3.5 mm - for elastic.

Beret knitting density: 17 p x 22 r with stockinette stitch = 10 x 10 cm, with a braid pattern 26 r = 10 cm

Knit in the round from bottom to top. Cast on 84 – 96 sts using Nepal thread on 3.5 mm circular needles. Knit 10 rounds in rib, p3/k3, start with p3. Track. round: * p3, k1, 1 yo, k1, 1 yo, k2, p1, k2, 1 yo, k1, 1 yo, k1 *, repeat. from * -* to the end = 112 – 128 p.
Switch to 5 mm knitting needles.
Continue next. way: * 3 purl, pattern M.2 (knit yarn over from the previous round behind the back wall) *, repeat. from * – * to the end (= 7-8 rapports).
Switch to bidirectional knitting needles when the number of stitches does not allow knitting in the circular. After pattern M.2 on knitting needles 42 - 48 sts.
Next round: knit all 3 purls together with one purl = 28 – 32 sts. Next round: knit 2 together to the end = 14-16 sts.
Cut the thread and pull it through the remaining loops twice, pull tight and fasten.

Beret for women, knitted

Good afternoon to all knitting lovers! My name is Elena, I live in the city of Irkutsk, I work in a large energy company, in my free time I enjoy knitting, it’s not just a hobby, it’s a flight of the soul. I really like to knit and crochet

The beret and scarf of a delicate color are decorated with braids, and the fringe on the scarf is made of stripes knitted with stockinette stitch. To knit a beret and a scarf you will need: 350 g for a scarf and 100 g for a beret of gray Cora yarn

Knitting with “heart” motifs, for women

Beret size: head circumference 56 cm. To knit a beret you will need: 100 g of yarn (55% merino wool, 10% cashmere, 35% microfiber, 130 m/50 g) type “Kashmir Baby” Louisa Harding; knitting needles No. 3.25 and 3.75. Knitting density

Blue beret for women made from “grass”

To knit a beret you will need: 100 g of wool and 100 g of grass-type yarn; knitting needles No. 4,5 and No. 6. Description of the beret Cast on 60 loops with wool yarn on knitting needles No. 4.5 and knit 4 cm with a 1x1 elastic band. Connect 2 types

Beret size: 56-58. The beret is made by knitting and crocheting. You will need: 100 g of mud (40 m x 50 g, 88% wool, 12% polyamide) olive color; knitting needles No. 12; hook number 9. Attention! The knitting calculation is given for the density of the sample:

The double-layer beret and scarf with pockets are knitted with English rib from thick melange yarn. Spectacular set for winter! You will need: 150 g for the scarf and 100 g for the beret of Mondial COLORADO melange yarn (58% merino wool, 42%

How to knit a beret for women, ideas from the Internet

Interesting and unusual berets can be knitted for women with your own hands. Look how many beautiful models we found for you!

Bright red beret for women

Size: single.
Head circumference: approx. 56/58 cm.
Materials: DROPS LACE yarn from Garnstudio 50 g color 3620, red; yarn DROPS KID-SILK from Garnstudio 25 g color 14, red; stocking and circular needles (40 cm) No. 3 mm.
Knitting density – 24 p. x 32 p. stockinette stitch in 2 threads = 10 cm x 10 cm.

Garter stitch (when knitting in turning rows): 1 garter row (r.) = 2 r. facial loops.

Garter stitch (for circular knitting): 1 garter stitch. = 2 circular r.: 1 r. persons and 1 rub. purl loops

Pattern diagram for the beret: see diagrams A.1 and A.13-A.15.

How to knit a beret for women

Knit in the round, starting from the center of the square, on stocking and short circular needles, from top to bottom.
Cast on 12 sts on 3mm needles with 1 strand of Lace yarn and 1 strand of Kid-Silk (= 2 strands). * K1, 1 yarn over, k1, p1. *, knit from *-* a total of 4 times (in the next row, knit yarn overs with crossed loops) = 16 sts. Knit in the round according to pattern A.1 (4 horizontal repeats). When you knit a full vertical repeat of pattern A.1, you will have 128 stitches.
Next row: * pattern A.13 (= 3 sts), pattern A.14 (= 14 sts) and A.15 (= 15 sts) *, knit from *-* 4 times in total. When you knit in full vertical pattern repeat, you will have 168 stitches.
Next row: knit all stitches according to pattern A.14 (= 12 repeats of 14 sts). Knit 1 repeat in height, then knit 1 row, evenly decreasing 46 sts = 122 sts. Knit 3 scarf rows and loosely bind off the stitches. Cap height – approx. 24 cm.

Beret diagram

Knitting a beret with knitting pattern “broken elastic”

Béret Gaufre by Véronik Avery, translated by Irishecka

The beret is designed for head volume = 52 cm.

On knitting needles No. 2.5 we cast on 132 stitches, knit with an elastic band 1*1. Then we switch to knitting needles No. 4, evenly increase stitches up to 177.

Pattern report = 25 stitches - this means that we will get 7 reports.

Let's start... 1st row (r.) – 1 edge, 2 purl. p., *22 persons. p., 3 p. p* (report between asterisks, repeat 7 times) finish p. 1 purl. p., 1 edge p. Thus we knit 8 r.

9 rubles - 1 chrome. p., 2 p. p., *shoot for extra. knitting needle 5p. at work, we knit 6 faces. n., 5 persons. p. with additional knitting needles, remove for extra. knitting needle 6 sts before work, knit 5. p., 6 persons. p. with additional knitting needles, 3 p. p.* (report of the pattern between the stars) finish p. 1 purl. p., 1 chrome. p. all out. R. knit according to the pattern.

Next 20 rub. we knit as well as 1 p. 31 rub. – like 9 rub. 33 rub. – 1 chrome. p., 2 vm. purl,* knit 22 p., 2 vm. purl, purl 1 p. *(report of the pattern between the stars) finish p. 1 purl. p., 1 chrome. item 35 rub. – 1 chrome. p., 1 p. p., * 1 p. remove as knit., 1 knit. p. and pull through the removed loop, k18. p., 2 vm. faces., 2 out. p.*... finish p. 1 purl. p., 1 chrome. p. 37 r. – 1 chrome. p., 1 p. p., * 1 p. remove as knit., 1 knit. p. and pull through the removed loop, k16. p., 2 vm. persons., 2 vm. purl*...finish p. 2 vm. purl 39 rub. – 1 chrome. p., 1 p. p., * 1 p. remove as knit., 1 knit. p. and pull through the removed loop, k14. p., 2 vm. faces., 1 p. p.*... finish p. 1 chrome P.

Continue knitting until 16 stitches remain on the knitting needle. Pull all the loops together and sew.

The beret is knitted in simple garter stitch, the description says to decrease the stitches, but I will try with partial knitting...

All rows are knitted with knit stitches only (garter stitch).

Beret for women, description

* We cast on 66 loops on the knitting needles. In every second row we decrease two loops 17 times from the left edge of the fabric. We do not reduce the right edge of the canvas. After the 22nd row, we begin to decrease on the right: in every second row 6 times, 3 loops. After 22+14=36 rows there should be 14 stitches left on the needles.*
Again we select 34 loops from the edge loops of the fabric on the left, and 18 loops on the right. There should again be 66 stitches on the knitting needles. We repeat knitting from * to * 9 times (We knit 9 such wedges - it all depends on the circumference of the head).

A knitted beret is a versatile and practical headdress that can bring any outfit to perfection, especially in combination with a spectacular scarf. Modern style is tolerant of both sophisticated soft and large, coarse knitting. Knitting a beret with knitting needles will not take much time, the main thing is to be patient and calculate the stitches correctly.

Modern girls can create an attractive and sophisticated look with a classic headdress - a knitted beret. This is not only a practical thing, but also very relevant for any time of year. It practically does not wrinkle and holds its shape well.
A knitted beret harmonizes well with dresses and trouser ensembles. As for knitting, any texture and any density of the fabric is appropriate here. Berets made from large shaggy yarn look very expressive.
An example of a voluminous spring beret made of red mohair, made in stockinette stitch.

Another version of a voluminous headdress made of thick yarn, additionally decorated with multi-colored buttons.


A versatile gray beret with a pattern of “grape leaves” will decorate any spring-autumn ensemble.

Wearing a beret is modeled with a wide leg. It can be completely tucked inside the beret or done only halfway. The photo shows an olive angora model with a removable fur pompom.

You don't have to buy wool to knit a beret. It can be knitted from leftover threads, even in different shades. The beret can be decorated with brooches, flowers and bows.

Women's winter berets knitted, diagram with description

There are a huge number of women's models and patterns of warm berets: with cross knitting, with braids, plaits, double knitting, with honeycombs, etc.
Usually the beret is knitted in circular rows based on the size of the head. For cold weather, it is best to make a headdress with yarn in several folds or in a dense pattern.

Volume beret

For model size 52-54 you will need 200 g of plain yarn. The work is best done using circular needles No. 4 with double thread.
For the front stitch, pick up facial loops (RP) in the front rows (LR), and purl loops (IP) in the purl rows (IR).
For garter stitch, LR and IR - IP are used.
The elastic band (1x1) is performed alternately by 1 LP, 1 IP.
Three-dimensional patterns are created based on the given diagrams 1,2.


Knitting procedure:
Cast on 104-106 stitches on the knitting needles, knit 2 cm with an elastic band and proceed to pattern No. 2. Having knitted 15 cm with a pattern, they begin to decrease the loops: in every 3rd row, 20 stitches are removed at once. At the end, the remaining 5 loops are pulled together with thread.

Tricolor beret

The beret cap is designed for R.56.
To work you need to prepare:

  • 100 g of three-color yarn;
  • knitting needles No. 4.5 and No. 3.5.

At the beginning of work, the knitting density is immediately determined. The given dimensions are given taking into account the fact that in a square of 10x10 cm 10 p. in 26 r.

The leg of the beret is made with a double hollow elastic band of 69 loops with an auxiliary thread (knitting needles No. 3.5).

Winter model with wedges

Often there are headdresses made on the basis of facial loops alone.


Knitting for spring, diagram with description

For many years now, the spring collection has included classic versions of beret styles. But youth street fashion is replete with stylish beret hats. Their basis can be convex petals in the style of the Ravelry pattern. The elastic band clasps the head tightly, and the beret itself hangs slightly back.


Beautiful women's beret with knitting needles, diagram with description

The romantic look is successfully complemented by openwork berets. They can be either warm or light spring-summer. Thin mohair models lined with identical yarn will warm young fashionistas in the cold spring, while cotton or bamboo openwork models protect from the sun and will be a wonderful addition to the boho style.

Foliage motifs
The work is done from the bottom (from the elastic band) up. From 144 loops, a 1x1 elastic band is formed and knitted for a 3-3.5 cm border. The pattern is made on thicker knitting needles.




Women's voluminous beret with knitting needles, with description

Large knitting of thick threads makes the berets voluminous and very elegant. Today, such models are relevant in combination with a down jacket or a short coat. It must be remembered that not every woman suits voluminous berets. They are most often worn by those with oblong and oval shapes. Moreover, they wear the beret so that the center is closer to the back of the head.

Model "Gerda"

Thanks to the intricate pattern, the beret retains its shape in any position.

Beret for a teenager




Beret autumn 2019, diagram with description

In autumn, prim classic models are especially in demand, complementing the elegant style. They should be in harmony with the color of your skin and hair. Black and white shades are considered neutral.

Double-sided Zigzag model
For a head circumference of 53 cm you will need 100 g of yarn. Knit the pattern in the round.
Diagonal pattern (rapport - 4 p.)


Yarn Merino kind 125 superfine, Filati Fantasia, Italy. 100% merino wool. 50 g / 125 m. Consumption: 50 g each of dark gray and light gray yarn. Hat elastic 60 cm.
Knitting needles No. 2, No. 3, No. 4, knitting needle.
Knitting density of 1x1 elastic according to a stretched pattern: horizontally Pgr = 2.1 loops in 1 cm; vertically Pvr = 3.8 rows in 1 cm.
Knitting density of the main Honeycomb pattern according to the washed pattern: horizontally Pgo = 2.12 loops per 1 cm; vertical air defense = 4 rows in 1 cm.
Beret size 57.

For the beret, 100 g of yarn were needed: 50 g each of light gray and dark gray. There will be a little light gray yarn left, but the dark gray yarn used to knit the beret band is enough, and you may need a little more. We recommend: per set you will need 150 g of light and 150 g of dark yarn.

Model description. The classic beret of medium volume is knitted from the bottom up, with a seam at the back. The bottom consists of 6 wedges, the diameter of the bottom is 22 cm. The width of the wall is 6 cm. The width of the band is 5 cm. The beret is knitted with a Honeycomb pattern with yarn of dark gray and light gray colors (Honeycomb pattern). The band is connected.

In order to tie a beret, .

Now let's see what parts the beret consists of.

Bezel, width of bezel h.

Beret wall, wall width H.

Bottom, bottom radius R.

We start knitting a beret with a band. The size of the band needs to be given special attention. If a classic hat clasps the head tightly enough and therefore stays on the head, then a beret that has a free shape is held mainly by the band. If the band is too loose, the beret will fall off, and if it sits too tightly on the head, wearing the headdress will not be comfortable. The band is most often knitted with an elastic band because of its elasticity and ability to hold its shape. In our model we use 1x1 elastic. , which allows you to make an elastic, tight edge.

To ensure that the band does not deform and the beret fits better, we recommend laying a hat elastic along the line connecting the band and the wall, the length of which is equal to the circumference of the head. The ends of the elastic are sewn by hand. It is convenient to insert the elastic using a knitting needle with a large eye.

Nowadays, thin hat elastic bands can be bought in almost any color and the elastic band will not be noticeable in the finished product.

Now you need to shape the beret. We wash the product by hand in a special detergent solution for delicate washing of wool. At the same time, do not rub or twist too much. Dry slightly by wrapping it in a terry towel. Since our model provides for a soft transition from the wall to the bottom, we will use a rolled towel for molding and put it into the beret.

All you have to do is let the finished product dry thoroughly and the beret is ready!

Share with friends:
Related publications