Office sundresses. A simple pattern of sundresses for the office: construction, modeling Sew a sundress for the office yourself

This sundress pattern is for obese women with a chest circumference of 112 cm.

Straight silhouette, elongated shoulder line, deliberately deepened neckline to make the neck look longer and the figure slimmer.

A zipper is sewn in between the straps at the front.

On the sides there is a fake valve.

This sundress looks good with a blouse or turtleneck.

A loose fit is a great option to hide a few extra pounds.

You can wear a narrow belt along the waistline.

For sewing a sundress, dense, but not thick fabrics are suitable.

Before cutting, compare your measurements with the pattern parameters. In this sundress, due to its relatively loose cut, you need to focus primarily on the girth of the chest and hips, and the waist will fit in any case :)

If you have not used our patterns yet, please look in previous articles on how to prepare it for work. We have already written about this many times. If you have any questions, ask them in the comments to this article.

The pattern is given without seam allowances.

Recommended seam allowances: for stitched seams 1-1.5 cm, for facing seams 0.7 cm, for hems and bottoms of the product 4 cm. In those places where clarification is possible after fitting, you need to allow allowances slightly larger than usual.

Open the sundress

• Back 1 piece
• Shelf 1 piece
• Back yoke 1 piece
• Shelf yoke 2 parts
• Plank 4 parts
• Neck facing 1 piece
• Back armhole facing 2 parts
• Front armhole facing 2 parts
• Valve 4 parts. If the fabric is thick enough, it is better to cut the lower flaps from lining fabric.

Sewing a sundress

After stitching, sweep all open edges.

• First, you should duplicate the trims, top flaps, neck facings and armhole facings with adhesive interlining.
• Process the valves and stitch them to the shelf according to the marks. If you are confident in your abilities, you can process pockets instead of fake valves.
• Process the slats on the shelf. Don't forget to stitch the zipper according to the marks.
• Yoke backs and shelves for now don't grind to the main details. First, sew the shoulder seams of the yokes (backs and fronts), iron them onto the back.
• Finish the neckline - overstitch, sweep, iron.
• Sew the yoke to the back.
• Place folds on the shelf according to the marks and secure with pins.
• Sew the yoke to the shelf. We place the yoke on the shelf, bend the facing to the wrong side of the shelf (as if we were wrapping the bar with the facing), grind it down and turn it inside out. Thus, we get a beautifully and cleanly processed bar-neck assembly.
• Sew side seams.
• Finish the armholes with facings.
• Hem the bottom of the sundress.
• You can add a finishing stitch along the edge of the placket, neckline and armholes.

To look slimmer, always choose contrasting blouses for this sundress. Then the silhouette is visually perceived not as one cloud, but is divided into three verticals: a slender figure in the middle, and arms in light chiffon on the sides, for example.

A sundress is an indispensable element of a woman's wardrobe. It can be beach, home, city, office, and even evening. Sundress patterns will help you create any of these options yourself.

Do-it-yourself summer beach pareo sundress quickly and easily

The hot season requires light clothing, and a sundress comes in handy here. Natural, flowing, flying fabrics will help you feel comfortable and be irresistible both in your own garden and on an evening promenade along the streets of a resort town. Of course, there is nothing more convenient than a sundress for going to the beach.

The beach model can be easily made at home in an hour, using a minimal sewing kit and a primitive pattern.

For the “sundress-vest” you only need to take one measurement – ​​hip circumference. The resulting figure must be multiplied by two, this will be the width of the sundress. The length is determined arbitrarily, the main thing is that it covers the lower part of the swimsuit. The best option is to mid-thigh.

The length and width should be marked on the fabric and carefully cut out a rectangle. If the material is synthetic, it is enough to cut it with hot scissors without finishing the edges. Make two armholes in the upper right and upper left corners with scissors, and the product is ready.

If the fabric is natural, you need to add one and a half centimeters of stitching to each edge on the pattern, and additionally cut out two strips for the straps.

When sewing a strap, fold the rectangle of fabric in half so that the wrong side is on top, stitch along the length and width on one side, turn it right side out using a hook or pencil, then stitch the other side along the width.

The straps are sewn to the upper corners of the product, which has been overlocked on all four sides.

Putting on a sundress-vest is very simple. One strap needs to be thrown over the right shoulder, pass the fabric in front under the left arm, bring it back, forward again, and put the second strap on the left shoulder. The fabric will drape beautifully to the shape of your body and reveal a cute cutout at the back.

This model can be worn in other ways. Wrap it around your body, in front above your chest, and tie a bow or a nice knot. There should be enough material so that the fabric falls freely and completely covers the swimsuit. When walking, such a pareo sundress will flutter beautifully, showing off a tanned body, but will not make the image too frivolous.

How to sew a model with a flounce on the shoulders?

Over the past few seasons, off-the-shoulder clothing has not gone out of fashion. To get into the trend, it’s enough to complicate the pattern of your summer sundress a little, and sew the product with a beautiful flounce on the shoulders.

For this you will need:

• textile;
• threads to match;
• chalk;
• safety pins;
• scissors;
• tape measure;
• notepad and pen;
• elastic band from 1 to 1.5 cm wide.

The work is carried out in stages:

• The first stage involves taking measurements. For a simple dress, you traditionally need to find out the half-circumference of the chest, waist and hips. If the dress is not fitted, it is enough to measure the chest and hips. If the chest is very full, when cutting the fabric, take into account the extra centimeters for darts.

The measurements determine the size of the finished product, so it is important to get it right. To avoid mistakes, you can use a cheat sheet from the Internet;

• The second stage is drawing the pattern. You need 4 parts: two for the base of the dress, two for the flounce. The length and width of the dress are cut out in accordance with the measurements received, plus 3 centimeters for an allowance on each side. The size of the flounce depends on how draped it should be, plus 2 centimeters for the seams. A belt is cut out separately from the same fabric;

• The third stage is sweeping. It is necessary to reduce excess or make a new pattern if there is a risk that the item will be too small. In addition, it is easier to work on a machine when the parts are already fastened together with a preliminary seam. It is better not to sew the shuttlecock to the base, but to pin it with pins;

• At the fourth stage, a machine is used for flashing. The two base rectangles should be sewn together, not reaching 25 cm from the top edge - these will be the armholes. You need to lay a finishing stitch along them.

The parts of the flounce are sewn together at the side seams, then you need to connect the middle of the base dress and the middle of the flounce so that the same amount of fabric protrudes at the edges. You should end up with a T-shaped dress with some extra fabric allowance on top. Next, pin the two parts together and sew the flounce to the base from armhole to armhole on both sides.

Now it’s time to hem the top of the sundress with a closed hem seam, leaving a small area through which the elastic will be threaded. The width of the seam should be slightly larger than the width of the elastic, the length of the elastic should be equal to or slightly less than the circumference of the shoulders.

To thread the elastic, it will be convenient to fasten a pin to one end of it, insert it into the unstitched end and, gathering the fabric, stretch it around the entire circle to the next hole in the seam. The ends of the elastic can be basted to make it easier to stitch on a machine, and the pin can be removed.

When the top of the dress is ready, all that remains is to hem the hem and the lower edge of the flounce with a hem seam and finish them with an overlocker. Lastly, the belt is sewn, and the sundress with a flounce on the shoulders is ready.

This model is suitable for girls with absolutely any figure. It can be modified with a belt and accessories, and made into your favorite outfit for a walk or a romantic date.

A sundress with flounces can also be made from knitted fabric. The results are very interesting and unusual models that are perfect for both a walk and an evening out. The following video will show you how to do this:

Boho style sundress pattern made of linen

Boho is the name of a style that implies an abundance of cotton fabrics, floral motifs, bright colors, lace, long floor-length skirts, and other attributes of bohemia and “flower children.” All this is perfect for summer sundresses.

The choice of fabric depends on the style direction. A model in a classic style will be made of velvet or knitwear, boho glamor is embodied in lace and chiffon fabrics, hippie chic gravitates towards burlap and suede, boho-eco for naturalness. But the most versatile option for warm weather and everyday wear is a linen sundress.

Linen clothing is 100% natural, has unique hygienic properties, breathes, does not cause sweating, and is pleasant to the skin. It is easy to wash, dries quickly, does not fade, does not fade, and is practical to wear. In addition, linen items look unusual, stylish, and, despite their brevity, expensive.

photos

The simplest boho-style linen sundress pattern consists of a minimum number of details and does not require complex measurements. This is the so-called sundress-apron with wide straps.

The pattern is assembled from three or four parts, depending on whether the sundress is planned to have a back, or whether the straps will be sewn to the skirt waistband. A classic sundress-apron consists of a chest, crossed straps and a skirt.

To draw a pattern, you need to measure the width of the chest (chest part of the sundress) and the height of the chest part. The length of the straps consists of the height of the back and half the height of the front plus 2-3 centimeters for the seams. The width of the straps is chosen arbitrarily.

The pattern is presented below.

Sewing begins with sewing the breast separately and stitching the straps. The straps are sewn to the chest, then folds are collected on the skirt fabric. A belt should be placed on the back; to do this, a strip ten centimeters wide is cut out and stitched.

The hem of the skirt is hemmed with a hem and finished with an overlocker. Lastly, you need to sweep away the top and bottom parts of the sundress and sew everything on a machine.

The color of a summer sundress can be any: white, blue, green, dark blue, cherry, brown. Fabrics with small floral prints, corduroy and ethnic motifs are suitable.

It is important to wear a sundress-apron over a T-shirt, T-shirt, or blouse. As outerwear, it will be complemented by a large knit cardigan, a thin parka or a faux suede jacket.

For pregnant

Summer with straps

This model is specially designed for changes that have occurred in the figure. It sits quite loosely, without tightness or constraining the belly, and emphasizes the beauty of a woman during pregnancy.

Modeling the pattern is very simple. A classic sundress with wide straps consists of only two fragments: the base and the straps themselves.

For the base, you need to measure two parameters: the length from the armpit to the knees, calves or ankles as desired, and the width equal to the waist circumference at the point where the stomach protrudes most.

If there are still a few months left until the end of pregnancy, the width can be arbitrarily increased by 10-20 centimeters to make the sundress “to grow.”

Warm

For cooler weather, you should stock up on a model with large pockets made of wool blend fabric. It will go well with turtlenecks and blouses. The sundress will look different if you sew it from jeans, velvet or any other dense fabric.

In addition to the main fabric 120 cm long, you will also need a lining for the pocket and adhesive, as well as an elastic band, tape for the drawstring and standard sewing equipment.

Enlarge the following pattern details to the desired size and print.

photos

Uncover

Fold the fabric in half and distribute the patterns over it. The bottom is cut out separately. After securing the pieces with pins, trace the outlines, add 1.5 cm allowances on the sides and 2 cm at the bottom, then cut out.

Two pockets are cut out from the lining fabric with allowances, which need to be pinned to the lower part of the front. For density, keeper tape is glued to the wrong side.

photos

Assembly

We sew down the middle section of the upper parts of the front, process the seam allowances and press the seam (the last steps apply to each seam). Sew the bottom part, matching the pockets. Then we grind down the darts. Next we connect the back parts and shoulder sections.

From the remnants of the fabric we cut out facings and sew them on, having previously reinforced them with adhesive material.

Having tried on the sundress, mark the line for the drawstring (approximately 10 cm from the chest line), grind the ribbon, grind the side sections and thread the elastic into the drawstring. All that remains is to process the bottom edge and decorate the new thing with beads or any decor to your liking.

photos

For plump women with scent

It is a mistake to think that dresses are the prerogative of exclusively slender young ladies. There are a considerable number of sundress models that can highlight the appetizing shapes that have captivated men from the Renaissance to the present day.

At home, it is important to choose the right style. On a full figure, from size 52 and above, wide models look good, but not shapeless robes, but with an emphasis on the upper body. Styles with a V-neck, which emphasize the ample chest and visually lengthen the neck, as well as models with a cut-off waist, are considered successful.

A universal option that hides flaws and focuses on the advantages of a voluminous figure is a sundress with a wrap.

Along the waist line, cut off the top of a preferably unfolded pattern. We close the chest dart and expand the waist dart. We make a cut to the top of the closed chest and place a point, as shown in the drawing.

Let's move on to shaping the bodice. From the top point in the side cut we put 4 cm down. From the resulting point to the right we put 1 cm (point 6) and draw a parallel line.

From point B4 (middle front line) 13-15 cm are measured on the pattern (point K). You can do more. From the bottom top of the shoulder dart G7, measure 10 cm upward and get the second point (K1). Now we connect it with points K and 6. But since we need to design the smell, the line K1K should go to the left shelf, at least 5 cm from the line of the middle front.

Now you need to model the back. From the top of the side cut, measure down 4 cm and to the left 1 cm. From the resulting point, draw a horizontal line to the line of the middle of the back, and also down parallel, as in the front pattern. The waist dart is closed, and the cuts at the top and bottom are rounded with smooth lines.

The final version of the bodice is odorless.

In the second option, we reduce the side cut by 4 cm, and increase the length of the right rug by 5 cm. The lower dart is not closed, but gathered. Mark the beginning of the cup by measuring on yourself from the shoulder line. Then, as shown on the pattern, connect the top point with a straight line to the smell point and a smooth line with a side cut.

As for the skirt, it can be straight, flared or half-sun.

There is a third option. You can outline on paper an existing, for example, wrap top. If necessary, adjust and transfer to fabric. After cutting, we assemble the front halves and combine them.

To ensure that the model is fitted and unnecessary seams are hidden, we will cut out 2 parts of the yoke 10 cm high. A “sandwich” from the yoke, bodice and the second part of the yoke is sewn together. In this case, both should be facing outward. We process the armholes with bias tape.

The back will be gathered with elastic. For it, a rectangle is cut out 1.5 times wider than the size of the back and the length from the beginning of the front armhole to the end of the yoke.

Having made the hem and stitched the back with an elastic band, we sew it to the front. All that remains is to cut out the skirt and finish the bottom.

For an example of modeling a chiffon sundress, see the following video.

Modeling a sundress dress with an open back

A thin green linen dress with a slightly low waist will perfectly highlight your tan. It will also add brightness and a little extravagance to the image.

On the base pattern for the front of the dress, we transfer the chest dart into relief as follows: we divide the armhole line in half, put a point from which we draw a smooth line through the dart at the waist. The shoulder dart closes. Then we increase the waist line by 2 cm, and deepen the armhole line.

On the back, we deepen the neckline and armhole, and move the dart at the waist to the side cut. The waist line also lengthens.

For a skirt, measure the hip circumference.

Draw a rectangle. The width is ¼ of the hip circumference, and the length is 60 cm. For a loose fit, add 3 cm.

In the front of the skirt at the top, measure 10 cm to the right and 25 cm down. Cut off the side and cut it separately. We draw a pocket.

The final result is below.

In addition to linen, crepe, satin, poplin or any other cotton fabric is suitable for this sundress. The model is fastened with a zipper at the back.

Also, when cutting all the parts, be sure to add seams.

For summer, a sundress with ties that completely exposes your back is also suitable.

Elastic model

An open back is beautiful, feminine, and most importantly, appropriate for an everyday look in the summer heat. Another undeniable advantage is that you can sew such a sundress yourself using a very simple pattern or without one at all.

Among the models that do not require preliminary construction of a pattern, the easiest to make is a sundress with an open back with an elastic band.

The basis of the style is a rectangle of fabric, where the width is equal to the circumference of the hips, plus 6 centimeters for finishing the edge, and the length is measured directly according to the figure from the level of the armpits.

By varying this parameter, it’s easy to get a playful short dress or a floor-length outfit for an evening out at a resort party.

When the base of the sundress is ready, it is spread out on a flat surface to mark the lines along which the elastic bands will be sewn. It is important to consider that regular elastic bands are not suitable for this purpose. They will look rough, wrinkle the fabric unsightly and squeeze the chest.

For a sundress, it is better to use an elastic thread, and you need to stitch the fabric before the rectangle is folded along the back line or side seam into a full-fledged sundress.

There are two ways to sew an elastic thread to fabric: stitch it in a zigzag, applying it to the wrong side of the product, or insert it into a bobbin and use it like regular thread.

The second option is faster and simpler, but in both cases it would be useful to mark lines with chalk along a ruler at the same distance so that the line turns out smooth and beautiful.

A horizontal gather with an elastic thread can fill the entire upper part of the sundress or be placed only above the chest and along the waistline. If it fills the top, then the distance between the lines should be approximately 1 cm. If these are two independent lines, 4-5 rows at intervals of 1 cm are enough.

A rectangle of fabric, gathered with an elastic band, is stitched from the wrong side. Then the bottom edge needs to be turned to the wrong side by 1 cm, sewn with a straight stitch, folded another 1 cm, ironed, and sewn on the front side of the product. This method is called double hem cutting.

A wide variety of fabrics are suitable for dresses with elastic. A single-color option in a fashionable color is easier to combine with other wardrobe elements. A sundress with a pattern is more self-sufficient and original. Floral motifs, ethnic and animal prints look beautiful among the patterns. Geometric patterns can be spoiled by the number of elastic bands, as they are hidden by numerous folds.

Modeling a straight cotton model

A cotton sundress with a straight silhouette is the embodiment of simplicity and femininity. This model is very versatile in combination with things of different textures and fabrics, practical, and suitable for owners of different figures. A straight, elongated sundress visually makes any woman taller and slimmer, while plain fabrics and a narrow vertical stripe will help hide extra pounds.

You can draw a pattern directly on the fabric, without resorting to the complex engineering design method that a paper base requires:

• First of all, measurements are taken. You only need three of them: chest, waist and hips. The length of the sundress is a purely individual matter.
• The simplest option with sewn-on straps consists of two halves. For the backrest, you need to mark the length, put the EG, OT and OB measurements on it, first dividing the value by 2, connect the points with a smooth line. For a slim figure this will be enough; for a fuller figure, waist and chest darts are needed.
• The top of the sundress can be straight, then the neckline will be square, V-shaped or round. Any of these options can be drawn in advance by hand.
• The width of the straps is also very variable. Thin straps will look better on thin shoulders, and moderately wide ones on sloping and full shoulders. Straps made of fabric of a different color, plain or lace, look interesting. Lace can also hide minor imperfections in the upper part of a sundress and lengthen a too-short hem.

Just a few lines, and a beautiful sundress for the summer is ready!

Like any product, after basting, a straight-cut sundress is tried on and checked for any flaws in the cut. Then they are sewn on a machine and decorated if desired.

Another accessible way to sew a straight-style sundress without drawing work is to create a pattern using a T-shirt that fits well:

• A suitable T-shirt is applied to the fabric from which it is planned to sew the sundress;
• Pin along the edges with safety pins and carefully outline with chalk on both sides;
• Then draw the bottom to the desired length. To the resulting silhouette you need to add 2-3 centimeters to the seams. Cut and stitch two one-piece pieces.
• You can also sew a straight-cut sundress from a modified pattern of a sleeveless straight dress. You just need to widen the side seams of the basic model to make it easy to put on a sundress without darts, and insert a side zipper.

It is advisable that the item is not made of stretch materials. Cotton does not have the ability to stretch as much, and the sundress may turn out to be a size or two smaller.

Floor-length with American armhole

The American armhole is a special cut for the upper part of a top, blouse or dress, sleeveless, implying a beautiful diagonal line from the armpits to the neckline. It completely opens the shoulders, while the neck can also be shown or covered with a stand-up collar.

According to the rules of style, the open top is balanced by a closed bottom - a maxi-length skirt.

The American armhole makes the item more feminine, attractive and elegant. It emphasizes beautiful women's shoulders, which are not only convenient, but also fashionable to show off in the summer.

Cutting this model is not difficult; even a novice seamstress can handle it.

The following measures will be needed:

• waist circumference;
• hip girth;
• length of the product from the waist to the floor;
• side length from the bottom of the armhole to the waist.

The result should be one large piece, on which you need to mark the height of the neckline, the depth of the back neckline, the depth of the armholes and the cut line in the middle. You can cut the front and back separately.

The model is stitched according to the following scheme:

1. Along the front center line, the dress is cut to the cut mark, then the two halves are tucked in turn and stitched on a machine. The narrower the hem, the neater the neckline looks.
2. The armhole and neckline on the back are processed with an overlocker, turned up 1 centimeter and stitched. If the fabric supply allows, you can make a double hem. The neckline is made in the same way.
3. An elastic band is inserted into the drawstring along the cutout of the back (it should only be at the back), which needs to be pulled together a little and secured with a topstitch. This is done so that the dress from the back fits the figure and does not hang in a fold.
4. For the neck drawstring, you need to sew a binding, which when finished will be no wider than 1 cm, or choose a beautiful braid. It serves as a tie. A braid made from strips of fabric instead of trim will look original.
5. Thread the finished tie into the neck drawstring. You can tie it around your neck or cross it on the back and sew it to the back neckline.

A sundress with an American armhole claims to be elegant, so it is recommended to choose high-quality material in rich, noble shades. A single-color model will be decorated with a belt, handmade jewelry, stripes made of beads, beads or artificial stones in an ethnic style.

The maxi length makes this item easy to pair with flat shoes, heels and wedges. A simple model without decoration will withstand the current combination with white sneakers or light sneakers.

Trapeze sundress

A sundress with a laconic cut in the shape of a trapezoid is a successful basic item both in the summer wardrobe and in the cold season. The wide hem hides the tummy, wide hips, imperfect waist, and emphasizes slender legs. A simple top is equally suitable for owners of neat breasts and a full bust, focusing attention on beautiful shoulders and arms.

A trapeze sundress can be with or without sleeves, with patch and secret pockets, with a varied neck shape, with embroidery, lace, flounces on the hem and other decor. It’s so easy to sew any model that even someone who has never attended a cutting and sewing course, or cut anything other than a chintz apron in a technology lesson at school, can do it.

The choice of fabric should be given special attention. The material should be quite dense, drape well and keep its shape, not crumble at the cut points.

Absolutely any color is suitable, but it is better to give preference to plain fabrics. The style is interesting in itself, and does not require additional measures to attract attention, so fabric with a pattern may look tacky.

You can cut out a sundress directly on the fabric, using, for example, thick knitwear with a stretch effect as a basis:

1. With a width of 1.5 meters, you will need only 1 meter of length, since the style assumes a short length.
2. First, you need to fold the fabric in half twice with the wrong side up (the pattern will be cut out on it) to get a rectangle with sides of 100 and 37.5 centimeters. Then, using chalk and a ruler, the construction of the pattern begins.
3. The first thing to draw is the neck. The depth and shape can be any; the classic version is a narrow round neckline 4 cm deep and approximately 8 cm wide.
4. Next, from the top point of the neckline, the height of the armhole is laid down, equal to half the girth of the armpit. Through the bottom point of the resulting segment, from the right edge, a line equal to one-fourth of the volume of the chest is measured.
5. If the model is planned without sleeves, 5-10 centimeters are measured from the neckline height point to the left for the shoulder seam. The extreme point of the segment is connected by a smooth line to the extreme point of the OG - these will be the armholes.
6. Then the length of the product is set aside. It can be made as large as the fabric supply allows. The average length is approximately 80-90 cm. The corners are smoothly rounded, forming a hem line with a margin for hem.
7. The last step of pattern construction is to draw one diagonal line from the extreme point of the hem to the bottom edge of the armhole under the arm. The drawing is ready and can be cut out. It turns out two parts, one of which is the front part, and the second is the back. The neck of the front part can be made a little deeper.
8. Further actions are predictable and simple: sweep away two parts, try on the item, adjust if necessary and start stitching on the machine. All internal seams are finished with overlock. The hem is made as narrow as possible, so the product looks neater.

How to sew a trapeze sundress in just an hour is in the next video.

A trapeze sundress can be worn as an independent element of the wardrobe, or can be incorporated into sets over blouses, shirts, items with long sleeves and a high neck.

Modeling a warm business sundress

A business wardrobe doesn't have to be boring. A warm wool sundress can dilute classic trousers and pencil skirts, adding a zest to the image of an office lady, which is acceptable even with a strict dress code.

The best fabrics for an autumn-winter wardrobe are wool, wool mixture, thick knitwear, and viscose. They retain heat well, drape beautifully and take on the contours of your figure. In a monochromatic design, dark blue, brown, black, gray and anthracite are indispensable in business style. With them you can create multi-layer sets that will not be cold on the way to work and not hot in the office when the heating is on.

Sewing a sundress in a business style is also not difficult, although it will require more time, diligence and correct construction of the pattern. A base pattern based on individual measurements is best suited.

In the drawing of the front of the dress, we close the shoulder dart and open 2 darts in the armhole and along the side cut. The latter should be directed to point A, which was obtained by increasing the chest dart by 2 cm.

We draw a new armhole line and remove the dart at the waist.

We take the resulting pattern and cut it along the waist line.

We model the collar, shown below, and re-shoot it separately. We cut off the yoke.

Let's move on to the back. We remove the dart at the waist, increase the armhole by 1 cm and deepen the collar, and glue the front yoke to the back shoulder.

The end result is details like these.

When applying a pattern to fabric, you should also add seam allowances.

The collar (4 parts), belt, bias tapes for the throat and armholes are cut out of leather. For a belt, 10 cm width will be enough. And the length is equal to the waist circumference, to which 90 cm is added.

We hope that the master classes and examples of modeling simple summer and winter sundresses we have selected will help you sew the ideal model that will delight you for many seasons.

You can see master classes on sewing sundresses in the following videos.

Dear seamstress girls! Beginners in sewing! Today's post is for you. Because today we will look at the 4 lightest models of a summer sundress, and the best part is that a pattern for such a sundress is not needed)).

Initially, sewing any, even simple, thing involves several stages:

• Construction of a specific model based on a pattern
• Actually sewing (tailoring includes knowledge of certain sewing technologies, depending on the choice of model)

This entire list, of course, will not be to the liking of a novice seamstress. But summer is in full swing, and I want something new right now!..So today we will sew a sundress without a pattern.

Let's start with the elastic model...

This model is based on a rectangle. As a rule, the width of the rectangle = the width of the fabric, and this is usually 140-150 cm.

The height of the fabric rectangle depends on the desired length of the sundress. We measure the length from the level of the armpits on the figure.

The next step is to measure the area at the top of the width of the fabric, which we will sew with an elastic band. Usually, either the bodice area alone or the upper part of the sundress up to the waist is sewn with an elastic band.

We will use an elastic thread for this process, and here we have two options:

• sew the elastic thread in a zig-zag pattern, simply applying it to the wrong side of the fabric (in the process, be sure to stretch the elastic thread to create a gather)
• or insert an elastic thread into the bobbin, then the process will be even more pleasant and automatic

Now you need to determine whether the horizontal gathering on the elastic thread will fill the entire part of the sundress to the waist (then we sew this part of the fabric with an elastic band to the waist, the distance between the horizontal lines = 1 cm approximately):

If the elastic thread does not completely fill the upper part of the sundress (as in the photo below), then we sew four lines on top (for a tight fit, since one line will not give it), and we also sew four lines with an elastic thread at the waist:

We will get a rectangle assembled with an elastic band. We sew both sides of it - this will be either the side seam or the back middle seam of the back.

All that remains is to process the bottom cut of the sundress.

Fold 1 cm of fabric over to the wrong side, sew it with a straight stitch, or iron it, then fold it another 1 cm and sew it on the right side of the fabric. The result will be processing the cut with a double hem.

The sundress is ready)).

Sundress without a pattern with a tie around the neck

Now let's look at another simple and interesting model.

This sundress with tie around the neck. What does it consist of? From two rectangles, sewn on the sides and connected at the neck with a ribbon, the ribbon is tied into a bow.

What measurements will we need?

• sundress length (measure from the base of the neck to the front)
• semi-hip circumference
• the distance from the point of the base of the neck (where the neck and shoulder connect - I’m writing in simple language, in more detail) and the point of the middle of the armpit (raise your hand and measure to the point where the side seam will begin).

We cut out two rectangles from fabric with a length = the length of the sundress + 4 cm for allowances and a width = the half-circumference of the hips + an increase in freedom (5-8 cm, for example).

We retreat 10 cm from the upper horizontal line on the sides, from this point to the side we set aside the distance that we measured (from the neck to the armpit), and cut off the resulting angle (as in the figure below on the left). We make a drawstring along the upper cut, folding the fabric to the wrong side.

We process both rectangles in this way.

Sew the rectangles on the sides.

We make a long ribbon and thread it into the drawstring. We hem the bottom of the product.

Strapless sundress (without pattern)

This sundress is also based on a rectangle, the width of which is slightly larger than the circumference of the hips. Length = desired length of the sundress.

Sewing steps:

1. Sew the side sections of the rectangle. There will be one side seam, or it will be the middle back seam.
2. We measure the circumference above the chest under the arms with an elastic band, cut off the desired length of the elastic band.
3. We sew elastic into the top edge of the dress.
4. We cut out a strip for ruffles (gathering) with a height of 12 cm and a length = girth under the bust multiplied by 1.5.
5. Sew the gather evenly to the top edge of the dress.
6. If desired, sew another elastic band to the waist.
7. If desired, the sundress can be fitted a little.
8. We process the bottom cut with a hem.

The sundress is ready! We wear it with a belt.

Trapeze sundress without pattern

The sequence of actions is as follows:

1. Cut out two squares with sides 75 cm.
2. We fold them in two layers.
3. Let's narrow them a little towards the bottom.
4. We measure the distance between the points on the shoulders. Place a dot in the center of the fabric. We set aside half the measured distance from the center. We put points A and A1.
5. From point A we set aside the shoulder width (5-7 cm). Set aside the shoulder width on the other side as well.
6. Between the shoulders we cut out a neckline of the desired depth (7-10 cm).
7. From points A and A1 we cut off a corner on the fabric, drawing this line to the middle of the fabric. You should end up with an inverted trapezoid with the corners cut off, as in the picture below:

We sew these two parts along the dotted lines in the figure (along the side and shoulder seams).

We process the neck and bottom of the product.

We wear it with a belt))).

In the office, the style should be emphatically businesslike, while the clothes should be comfortable and go well with other wardrobe items. The sundress was the best fit for this role, but subject to some changes in fabrics and models.

What is a sundress for the office?

Instead of thin (sometimes too wrinkled) and bright fabric, fashion designers used wrinkle-resistant dense materials with the addition of wool and viscose.

The silhouette of the sundress has become more fitted, and instead of frivolous thin straps and a neckline, a full bodice has appeared, cut without sleeves. This circumstance allows you to wear a blouse or thin knitted knee socks under a sundress, which perfectly refreshes the appearance of the product, giving it newness. You can have a whole arsenal of blouses and sweaters in stock in order to look different every day.

Models of sundresses for the office

Your imagination and the skillful hands of a craftsman can work wonders, and your office sundress will have the shape that you like best. However, there are several options for ready-made dresses that are used for mass tailoring in light industry.

Sundress-case

The bodice of this office outfit is quite closed. There may be a small cutout on the chest. The silhouette is fitted, the lower part of the sundress tapers, forming an “hourglass”. The length of the product varies depending on preference, but most often the dress code requires that the skirt cover the knees.

This sundress can be worn over a thin golf shirt or blouse. The model is fastened with a long zipper sewn into the side seam. Thanks to this fastening system, the tailor has the opportunity to literally sculpt a woman, making the outfit quite tight-fitting to the figure.

If a feature of your physique is a massive lower part, then such a sundress will help hide your flaws and highlight your advantages.

Sundress-tunic

This model has a free flying silhouette. Most often it is sewn from knitwear. Its texture allows you to disguise fullness in the hips and waist, which is an important advantage for plump ladies of Balzac’s age.

Excessively thin women also often prefer such models so as not to once again emphasize their thinness. As a rule, the bodice of a sundress is draped.

This allows you to create original silhouettes with flowing folds. You can simply put on such a sundress through the neckline. The recommended length is knee-length, however, thanks to the loose fit, you can afford a shorter option.

Such knitted sundresses look very organic with translucent golf mesh. You can choose it to match the product or in a different shade. This will only add originality to your outfit.

Sundress with thin straps

We have already mentioned above that office sundresses differ from beach summer sundresses in the classic cut of the bodice, which is made with virtually no neckline. However, as the proverb says, “Every iron rule has its golden exceptions.”

Therefore, fashion designers designed an office sundress with straps. It is a strict straight-cut skirt, to which a part is sewn, which fits the waist like a corset, and straps are already attached to it. They are more of a decorative nature and because the outfit can last without them.

As a fastener, just like in sheath sundresses, a long snake sewn into the side seam is used. The material for such an office dress with straps can be either knitwear or suiting fabric with the addition of wool and viscose.

This sundress model is more suitable for ladies with classic shapes - wide hips and a narrow waist.

Sundress for the office - photo

Remember that at work you should look as charming as on a date with your beloved man, so don’t hesitate to experiment with colors and shapes, especially since an office sundress provides you with such a unique opportunity!