Make flowers in kanzashi style. The Japanese technique of making flowers from ribbons is kanzashi. Video master classes. Video on how to make flowers from satin ribbons with your own hands

You may have already seen amazing hair and clothing decorations made from silk flowers. This beauty has a name - KANZASHI TSUMAMI.

Hairpins and combs are traditionally used in Japanese hairstyles, but nowadays jewelry using the Kanzashi technique has gained its popularity far beyond Japan. The so-called “kanzashkas” now serve not only as hair decorations, they are used to make brooches, use them as interior decoration, etc.

Candlesticks using Kanzashi technique

Box using Kanzashi technique

If you figure out how to do Kanzashi, it becomes clear that it is not at all difficult.

Materials and tools

In order to make products using the Kanzashi technique, you will need the following materials and equipment:

You can cut fabric or ribbons with scissors or with a soldering iron. To do this, we need a surface on which to cut. It could be an old unnecessary kitchen board, but I preferred ordinary wall tiles (left over after renovation), the soldering iron does not burn them and they are easier to clean. Some petals can be burned with a candle or lighter.

It is better to use glue that is thick and transparent so that it does not leave marks after drying. I opted for “Moment-gel”: transparent, does not flow, and adheres well.

Many people advise using tweezers when rolling petals.
I use tweezers when burning fabric over a candle.

satin ribbons of any size, optimally 5 cm and 2.5 cm, but you can take any fabric: silk, satin, organza, etc.
ruler
pencil or chalk for marking even squares
scissors (any kind, as long as they are sharp)
lighter and candle or soldering iron (if you know how to use it)
Moment-gel glue or hot glue gun
tweezers (preferably long)
long and thin needle
strong thread (for example, monofilament)
beads, sequins and all sorts of beautiful little things

I think over time you will decide for yourself how and what is more convenient for you to work.

Types of Kanzashi petals

The Kanzashi technique is as follows: many small even squares of fabric are folded in a certain way and assembled into a flower. The petals themselves are sewn or glued together.

No matter how strange it may sound, there are only 2 types of kanzashi petals: round and narrow, and the rest is up to your imagination.

Using this flower as an example, we will learn how to fold narrow and round petals:

Narrow kanzashi petal - master class

We use the same materials and tools as listed above.

Using a soldering iron or scissors, cut into even squares. I have a satin ribbon 5 cm wide, which means the squares are 5 by 5 cm. Their number depends on the size of the flower that you will collect. There are 7 yellow and 5 green.

It is often recommended to roll the leaves using tweezers. To be honest, I find it more comfortable with my fingers, but this is what you prefer.

Fold it into an even triangle. The fold itself is at the top.

We apply the right corner of the triangle to the left.

And fold it again in the same way, from right to left. Align the folds.

Trim the ends of the fabric evenly:

And we burn it a little over a candle, fastening the edges at the same time. This is done like this: holding the edges with tweezers, quickly move the petal over the flame.

It is better to burn at the very bottom of the fire, then the fabric will melt and not burn.

We also cut off the lower edges and melt them. Here you can not glue them together, but simply melt the fabric so that it does not crumble.

Here's what we got:

Back view

Using the same principle, we roll up the remaining green leaves.

For clarity, watch a video master class on narrow Kanzashi petals:

Front view

Round kanzashi petal - master class

We fold the yellow square into a triangle.

Now we collect the side edges in the middle, towards the bottom corner. The folds are made from the top and sides.

We pull the side corners back and check that the edges are folded evenly.

We also cut off the ends and melt them.

We also trim the bottom edge evenly and melt it.

Only here the edges must be burned and be sure to be glued together.
While the fabric is warm, I simply pinch the edges with my fingers.

This is what we got. From this side, drip a little glue inward and glue the leaf together.

Back view

Front view

These are the blanks we got. Here you can clearly see where the yellow petals stick together.

In the video master class, you can watch again how round petals are made, and also learn how to assemble beautiful hair ties:

How to make kanzashi flowers

Let's start collecting kanzashi flowers. We string the yellow petals onto a needle and thread. I prefer monofilament because it is not visible.

And we tie it into a flower like this:

We cut out circles from cardboard and tape, place a cardboard circle on the tape, and generously coat it with glue.

And, tucking the edges, glue the fabric to the paper. Let the glue dry a little and coat the surface with glue again.

Then we glue the blank to the flower from the back side.

Here it is better to use glue rather than a glue gun. Since our flower is voluminous, it is very difficult to glue it evenly right away. And while the glue dries, you can adjust the leaves to make it even. It’s difficult to do this with a glue gun - the glue hardens very quickly and it’s quite problematic to peel it back off.

Here's what we got:

Apply glue to the tip of the green leaf (here I use a glue gun)

And connect it with the second leaf.

We make two double leaves.

We also lubricate the single leaf with glue and glue it between the two already connected leaves.

In the same way, we glue three leaves to the double one.

This is what the branch should look like:

Lubricate the tip of the twig with glue

And glue it between the leaves of the flower.

Glue a bead or rhinestone into the center of the flower.

This kanzashi flower can be used to decorate a brooch, a hairpin, or a hair tie. And if you get a little creative, you can create a lot from the 2 simplest kanzashi petals!

A little history of beautiful needlework

Historically, the birthplace of this art form, like origami, is Japan, and it appeared around 1700. Japanese women were not allowed to wear necklaces or bracelets, so they decorated their hairstyles on a special scale.

Kanzashi (or kanzashi) were combs, sticks or hairpins decorated with flowers made of silk. Looking at kanzashi, one could judge the character and even the social status of a woman, because luxurious jewelry often cost even more than a kimono.

Kanzashi varied in color and shape depending on the time of year. The products were created by famous craftsmen. The manufacturing technology of those times was different from the modern one - craftsmen used rice glue, each silk square piece was folded and a petal was formed, they, in turn, were collected on a thread and glued to the base. In this way, entire bouquets were collected and decorated with combs or hairpins.

Kanzashi and modernity

In our time, this Japanese technique has not lost its importance and has become popular in European countries. Needlewomen create flowers in the kanzashi style and decorate hair accessories and brooches with them. These accessories are especially popular among brides, because kanzashi flowers can be used to tastefully decorate wedding paraphernalia.

Young mothers will also be interested in this type of creativity - their little princesses will be happy to wear all kinds of bright elastic bands, headbands, and hair clips.

Mastering the satin ribbon kazansha technique is not that difficult, but you will have to be patient and persistent, as this is quite painstaking work that requires attention, accuracy and perseverance. If you have already tried, or, the work will not seem difficult to you.

Starter kit for a beginner kanzashi master

So, the materials needed to get started:

satin ribbons (for beginners, preferably 5 cm wide);
beads or buttons (for the centers of flowers), a lighter or a candle (but be careful - the candle can smoke the ribbon);
sharp scissors, needle and sewing thread;
glue (we recommend choosing a colorless one, “Moment Crystal” is ideal);
tweezers.

You can use a wide variety of accessories and materials: organza, tulle, rhinestones, sequins, etc.

Where to start: basic operating principles

For convenience, immediately cut the ribbons into identical squares and singe them so that the satin does not fray during the process (more experienced needlewomen use a soldering iron, it cuts the ribbon evenly and simultaneously singes the edges). In the original, in the kanzashi technique, there are only two types of petals - sharp and round. But modern craftswomen have come up with many modifications of petal shapes, which allows them to diversify their work and make them even more interesting.

The step-by-step technique for creating kanzashi is as follows:

Cut the satin ribbons into squares.
Fold each square into a petal, singeing the ends and joints with a lighter.
Gather the petals onto a strong thread.
Glue the resulting blank to the base - it can be a felt circle or a cardboard circle covered with satin to match the flower.
Glue or sew on the center of the flower (for example, a button).
Add decor if necessary (for example, rhinestones or lace);
attach the finished kanzashi flower to the base (hairpin, brooch, headband, etc.).
Wait for the glue to dry completely and straighten the petals if necessary.

A short video tutorial:

So, you are already familiar with the basic principles of working in the kanzashi technique, so it’s time to act! But from these luxurious flowers you can create crafts and kanzashi paintings with your own hands, which will become an interior decoration or an unforgettable gift for loved ones!

Pleasure with benefit: the benefits of a new hobby

This simple type of needlework will also be interesting for children - crafts in the kanzashi style can be created together with the kids, making figurines out of them. For example, you can make a Christmas tree from basic sharp petals; you just need to glue them on a conical cardboard base in rows. But be careful, small children must work under adult supervision!

If you don’t have enough imagination and experience, then you can get ideas for inspiration for creating kanzashi from master classes. Of course, you won’t be able to exactly repeat the work of another master, but as practice shows, after looking at the beautiful flowers of craftswomen, you will certainly begin to create your own You will develop your own style and handwriting.

Sunflowers using the kanzashi technique

Flowers in the Kanzashi style are becoming increasingly popular, so once you gain experience, it makes sense to give it a try.

You can sell your work on a variety of online platforms dedicated to handicrafts, as well as directly at fairs, which are often organized in many cities. Yes, participation in such events is often not free, but there you can not only sell your work, but also meet other artists and exchange experiences. A sea of positive emotions is guaranteed to you!

As you can see, it's not that complicated! The main thing is to start, and then you won’t be able to stop! Unfading flowers will bloom in your hands, and the kanzashi technique will become your favorite form of creativity!

From theory to practice: master classes

If you have carefully read this publication and now want to consolidate your knowledge in practice, proceed to master classes on making crafts with your own hands. Even more MK on Kanzashi is waiting for you.

Floral decorations made from satin ribbons are very unusual and beautiful. Made with your own hands, they are the best gift for both children and adults.

Making flowers from satin ribbons with your own hands is a painstaking but exciting task.

The main tools for making jewelry are:

With proper use of available materials, the flowers come out strong and of good quality. They can be attached to elastic bands, hairpins, headbands, or arranged into bouquets.

Types of petals

Satin ribbon flowers are collected from petals of different shapes. The main ones are sharp and round. Any type of petal can be made with your own hands. The sharp shapes of the petals are suitable for making flowers such as aster, chamomile, dandelion, sunflower, bluebell and others.

The varieties of sharp petals are:

Round petals are used to create flowers such as roses, lilacs, ranunculus, peony and others.

The varieties of round petals are as follows:

two-color round (double);
round for rose;
round inverted;
round flat;
round narrow;
round with a heart.

Master class for beginners: a simple flower in 5 minutes

A satin ribbon can turn into a flower in just 5 minutes. From this you can calculate that, for example, a hairpin with your own hands will be done within 7-10 minutes. It is necessary to strictly follow the instructions.

Step 2. Preparing petals. To do this you will need:

fold a square of satin ribbon diagonally, marking the conditionally sharp ends with numbers 1 and 2;
combine ends 1 and 2. In the resulting triangle, mark the new acute angles with numbers 3 and 4;
fold ends 3 and 4, resulting in a sharp petal;
cut off excess material (cut a right angle parallel to the folded side and an acute angle parallel to the fold);
solder the cut edges with a candle or lighter, fixing the petal with tweezers for convenience.

Step 3. Flower formation. The bases of the petals need to be connected with a thread like beads, tightened and decorated with a flower. Then you should glue the petals together for a more reliable fixation.

Step 4. Decoration. The middle of the flower must be decorated with a bead or button (optional). It is possible to add rhinestones or small stones to the center of the petals.

Flower made of satin ribbons 2.5 cm - step by step instructions

A 2.5 cm wide satin ribbon is perfect for creating lush flowers with your own hands. When finished, they resemble a bush rose. The technique is simple.

Step 1. Preparation of necessary materials:

pieces of tape 2.5 cm wide and 7 cm long;
needle and thread;
fire;
scissors.

Step 2. Preparation of petals . You need to melt the cut edges of the tape, bend the tape on each side so that you get a trapezoid, and additionally melt it to secure it. Then you need to do the same with all the tapes.

Step 3. Flower formation. It is necessary to sweep each petal blank along the bottom edge, pull the thread and fasten it, then sew the bases of the petals so that you get a flower.

To add volume, you can attach 3 more petals on top or leave the flower in a single layer.

Step 4. Decoration. Beads glued in the center, imitating the core of a flower, will look harmonious.

For the rim

Any flowers are suitable for decorating the headband, such as large and lush roses, peonies, chrysanthemums, zinnias, as well as small roses, jasmine, and bells.

To make a headband with a jasmine branch, you will need:

a headband wrapped in a satin ribbon the color of the first green;
a strip of rounded felt 2x16 cm of the same color;
yellow plastic stamens - 1 bunch;
pieces of white satin ribbon 5×5 – 25 pcs.;
pieces of green satin ribbon 2.5x3 cm - 25-30 pcs.;
thread, needle, scissors, glue.

Jasmine flowers form very simply. It is necessary to sweep a diamond shape on a white piece with white thread, then tighten the thread, insert a plastic stamen inside and sew it up. It takes 3 to 5 minutes to make 1 jasmine flower.

Important! When basting, the thread should not be interrupted, otherwise it will be impossible to form a flower.

To make a sheet from a green piece of satin ribbon, you need to fold it in half and round it off on one side with scissors. Then you should melt the edges and, while they are soft, slightly deform them in the manner of a jasmine leaf, gather the lower edges and melt them.

The finished elements are glued evenly onto a strip of felt to create a jasmine branch. You need to let it set and glue the finished composition directly to the rim.

For hairpins

To decorate hairpins, small flowers of light weight are often chosen, otherwise the hairpin will not hold the hair well and will slip off. Ideal options are small roses, one small chamomile, and aster. A very fast and beautiful flower is obtained from only 3 petals. A satin ribbon 5 cm wide is cut into 5 cm pieces. You need to make circles from the resulting squares.

You need to fold them in half and sweep them in an arc, tighten them, forming a petal with your fingers. Then you need to sew 3 petals together and glue a bead in the center. The resulting flower is glued to the hairpin. Note. If the flower is not large enough, you can increase the number of petals to 5-7. However, it is necessary to select a larger core size.

Ribbon roses

There are at least 5 techniques for making roses from satin ribbons.

For beginners, the following option is suitable:

Kanzashi chamomile

To make chamomile you will need:

First you need to prepare the petals. To do this, the atlas square is folded diagonally, then the sharp corners are folded towards the center. The resulting petal is folded in half. The tip is cut off and scorched with fire. Then fix it with tweezers on the other side and cut off the base parallel to the fold. They are scorched with fire so that the ends are soldered together. 15 such petals are prepared.

Carefully glue the petals at the base, forming a daisy. Glue a yellow button or a circle of yellow felt in the center. Kanzashi chamomile can be used to decorate a hairpin, a child’s handbag or a headband.

Lush flower made of satin ribbon

A lush flower is formed from round petals singed along the entire perimeter. They are carefully glued layer by layer to the base. There should be at least 10-12 petals. They can be either the same color or different.

The set of tools is similar:

satin squares with a side of at least 5 cm;
scissors;
fire;
stamens – 3-5 pcs.;
glue gun

Aster

To make an aster you will need the following supplies:

pieces of satin ribbon 2.5×5 cm;
tweezers;
scissors,
fire;
glue gun;
several circles of felt.

For a medium-sized flower, 30-40 petals are needed. It all depends on the desired number of layers and the diameter of the aster. The petal is made in two stages.

Stage 1. A strip of satin is folded in half lengthwise and clamped with tweezers. The edge is cut at an acute angle and sealed with fire.
Stage 2. From the opposite edge, the strip is folded like an envelope, clamped with tweezers and fixed with fire.

Petals are glued onto the felt circle along the very edge. The next layer is glued closer to the center. The petals are placed visually between the petals of the first layer. The same is done with all layers. The number of petals in each subsequent level decreases. The finished flower is decorated with a bead core. You can also combine the colors of the petals.

Bell

When making a bell, the following materials are needed:

Bell petals are ordinary sharp petals, with the seam turned inward. One stamen is glued to each petal at the base. Then you need to glue their sides together, forming the flower itself.

The leaves of the bell are made in the same way as the petals, only the ribbon must be smaller in width. They should be secured with a glue gun under the flower so that they peek out slightly.

Hibiscus

To make hibiscus you will need:

You need to cut teardrop-shaped petals from the squares. Before assembling the flower, you need to corrugate them. To do this, the petal is folded like an accordion into 4 rows, then twisted into a rope and carried over the fire for several seconds. The cooled petal is unrolled.

A wire is glued to half of the petal on the wrong side. There should be at least 7 such petals. It all depends on the desired volume of hibiscus. Several stamens are twisted together and a bud of petals is formed around them. Then the petals are slightly leveled and arched.

Narcissus

To make one daffodil you need:

scissors;
fire;
tweezers;
glue;
5 squares of white satin ribbon 5x5 cm;
3 yellow squares 4x4 cm.

The petal is made like this:

A square of white satin is folded diagonally twice. Sharp corners must be folded like an accordion into 1 row on each side, then clamped with tweezers, cut off the excess and soldered with fire. You should get a petal with two folds inside.
The upper edge of the petal is clamped in the middle with tweezers and melted with fire. It has a slightly pointed shape.

The stamen is made in a similar way, only the upper edge is not pointed.

Assembling a flower involves sequential gluing of all elements. The resulting daffodil is practically indistinguishable from the real thing.

Poinsettia

Even beginners can make a poinsettia flower from satin ribbons with their own hands.

The required materials are:

pieces of tape 5 cm wide and of different lengths;
scissors;
fire;
glue;
large stamens;
wire.

The petals need to be cut out. To do this, pieces of tape are folded diagonally and cut out to form a petal. On top of the edges, 2 cuts are made on each side. The blanks are melted over a fire and the edges are slightly deformed. In total, you need 3 petals 5 cm long, 5 petals 6 cm long and 5 petals 7 cm long. Leaves are made in the same way - from pieces of 5x7 cm.

Assembling a flower begins with sequentially gluing together petals of equal length. The first layer of small petals is glued to the stamen, then the next layer is of larger petals, and the largest ones are glued last. The petals must be arranged in a checkerboard pattern.

You need to glue the wire to the leaves on the back side. They are attached to the flower by wrapping the stamen with wire.

Dandelion Kanzashi

To make a dandelion you need:

The technique is as follows:

The tape must be cut into strips 7 cm long. Fold each in half and solder the ends. These will be dandelion petals. Green ones need at least 25 pcs., yellow ones at least 27 pcs.
Green petals are glued around the perimeter of the felt circle using a glue gun. The second layer is also glued in a checkerboard pattern from green petals.
All subsequent layers are glued with yellow petals. This way you get a voluminous chamomile, which is perfect for decorating headbands and hairpins.

Sunflower

Any type of sharp petal, such as an aster's, is suitable for making a sunflower. A two-layer flower will require at least 26 petals. The petals are glued to a felt circle with a diameter of 5 cm along the very edge. A little closer to the center you need to glue the second layer in a checkerboard pattern.

The middle can be made of a circle of even felt or dermantine with a diameter of 4–4.5 cm. Beads or large black beads are glued onto it. The middle is glued to the flower, and the sunflower can be considered ready. If desired, you can add decor in the form of a butterfly or bug.

Lilac

To make a lilac branch you need:

The tape must be cut into strips 1.5 cm long. At least 60 pieces will be required. Flowers are made from them in the same way as jasmine flowers. Just before tightening the thread, you need to stick a wire with a bead strung on it into the center of a piece of ribbon. The result is a lilac flower on a stalk.

When all the flowers are ready, you need to form mini-branches of 3 pieces from them. and secure with one of the wire legs. A lilac branch is formed from these twigs and wrapped with floral tape.

Ranunculus

To make a ranunculus you will need a standard kit:

To make the petals, you need pieces of satin:

2×2 cm – 18 pcs.;
2.5×2.5 cm – 18 pcs.;
3×3 cm – 14 pcs.;
3.5x3.5 cm – 24 pcs.

You need to cut out round petals from them, like a peony, trim the base, melt it over the fire, fold the base like an accordion, hold it with tweezers and secure it with fire. The core of the ranunculus is made from a 5x5 cm piece of satin, into which a wad of cotton wool is sewn. It turns out to be a ball on which the petals will be attached.

Assembling the flower must begin with the smallest petals, pasting them over the stamen ball. Thus, you get a very beautiful flower that will suit any decoration as a decoration.

Wedding bouquet of ribbons

Over the past few years, wedding bouquets made from satin ribbons have become very popular. It's unusual and beautiful. Such a bouquet will please the eye for a long time, because it will not wither.

Handmade flowers made from satin ribbons for a wedding bouquet will become a unique symbol of family happiness.

By combining various flowers from satin ribbons, you can create decorations for hairpins or headbands, as well as themed bouquets with your own hands.

To complete it, you need to make a suitable number of flowers from ribbons (roses are most often chosen) and stick them on a foam ball with a handle. For greater strength and beauty, you can stick a needle with a stone at the end into the middle of each flower. The handle must be wrapped with a strong satin ribbon. As additional decor, you can use rhinestones and pearl beads.

Flowers made from satin ribbons are an effective way to decorate accessories, household items, children's items, and even make a wedding bouquet.

Video on how to make flowers from satin ribbons with your own hands

How to make roses from satin ribbons with your own hands, watch the video:

We make flowers with our own hands from satin ribbons:

Zhanna Shadrina

First, I will tell you why I became interested in this particular type of needlework.

Firstly, the kanzashi technique is very easy to perform.

Secondly, I was attracted by the availability of the material.

Thirdly, it attracts the variety of colors, which develops imagination. I am also pleased that you can create beautiful and unique decorations in the form of flowers from ordinary pieces of fabric.

And most importantly, this type of manual labor can be used in working with our preschoolers.

With the help of kanzashi, you can decorate the interior of the group, add attributes of role-playing games, and make gifts for the holidays.

I hope that kanzashi will spark your interest and desire to learn this skill. You just need to be patient and persevering.

Story

The art of Kanzashi dates back to the 17th century. Translated from Japanese, “kanzashi” means hairpin. At that time, flowers made from kanzashi ribbons were an indispensable accessory in a woman’s costume, which was not just a work of art, but also indicated the social status, marital status and character of the owner. And most importantly, very often the cost of kanzashi was several times higher than the cost of a kimono.

It was the hairpin that gave the name to a new original type of decorative and applied art, which is gaining more and more fans around the world.

Kanzashi is based on origami - the traditional Japanese art of folding paper crafts, only in this case, they fold not paper, but squares of fabric, which turn into amazing flowers and floral arrangements

Relevance

Fashion is the engine of progress. Every girl or woman strives to be one and only in everything, including fashion. And only handmade work gives a 100% guarantee to the owner of this jewelry that it is the only one. Therefore, a handmade product is highly valued and is in great demand on the market. Today, various hair decorations are very popular. This is probably why the Japanese kanzashi technique is in great demand.

Target

familiarization with manufacturing technology,

teach teachers how to make flowers from satin ribbons using the kanzashi technique

Tasks

Studying the technology of making kanzashi;

Purchase and preparation of equipment for making kanzashi;

Development of creative abilities and imagination;

Create a desire to create beautiful things with your own hands.

Product creation;

Product presentation

Materials and equipment

Scissors

Pencil

Ruler

Glue gun

Satin ribbons 5 cm wide, pink and green

Candles or lighter

Manufacturing sequence

1. cut the satin ribbon into squares

2. Take the pink blank and fold it diagonally to form a triangle.

4. burn the ends

5. we should have 10 petals

6. take one petal and roll it into a tube on both sides

8. the flower is ready

10. and fold it in half

11. then cut diagonally

12. and burn the cut side

13. unfold, it turns out to be a petal

14. Glue the finished petals (there should be 3 of them) to the flower

15. From the remnants of green fabric we make a rectangle, burn the sides, and glue a pin to it

16. Glue a pin to the back of the flower

Having become a tradition many years ago, Japanese hair jewelry "kanzashi" has always been famous for its elegant beauty and variety. The intricately styled hair of Japanese women was generously decorated with silk flowers made using a special technique, selected to suit the place, season and status of the girl. Now “kanzashi” is a special art that has gone far from its origins, because its fruits are now used by girls from all over the world. Flowers are made from silk and satin ribbons in a special fancy way, which are used as hairpins and brooches, and as an element in all kinds of jewelry.

Of course, it’s worth starting from the beginning, because the “kanzashi” technique came from Japan, and originated there back in the 18th century. Translated, Kanzashi means “hairpin”, “comb”. It was these accessories that Japanese women used to express their individuality, show their position in society and family status. Looking at these decorations, one could say a lot about a woman, even how many children she had, because every flower and curl necessarily meant something.

All this beauty was not cheap, and sometimes exceeded the cost of the most expensive silk, hand-embroidered kimono. If a Japanese woman was wealthy, then she could decorate herself with 20 very expensive kanzashi, but the number and location of them on her hairstyle are always clearly regulated, because they carry the maximum information about the owner. Thus, an older geisha will always have less jewelry than her student.

Kanzashi delights and amazes with its diversity, because it is divided into several types: Bira bira (metal strips attached to the base of the decoration), Kogai (peaks made of natural stones, metal and ceramics), Kushi (comb made of wood or tortoise shell), hanagushi (combs to which silk flowers are attached), Kanoko Dome (two-prong hairpin made of precious metals), Tama-Kanzashi (hairpin with a round tip), and of course the most luxurious Hana kanzashi (floral jewelry with silk flowers).

It is worth telling about the Hana kanzashi species in more detail, since it is from it that the technique of special flower arrangement - “kanzashi” - came from in our modern times. These floral decorations were made and worn depending on the season and holiday, the status and position of the woman. It is worth noting that this type of jewelry was more acceptable for young girls, brides and geishas.

Flowers are made from squares of fabric, ribbon or silk. They are rolled with special tongs to form a petal. Then the petals are collected with silk thread into flowers and inflorescences.

In January, kanzashi flowers are green, white and red, dominated by pine, bamboo and plum blossoms. In February - various shades of dark purple, the flower is plum. In March - yellow and white daffodils and purple peonies. In April - soft pink cherry blossoms, butterflies in a variety of variations, and lanterns. In May there are blue irises and purple wisteria. In June - light blue hydrangea, willow, carnation. In July - round and folded fans. In August - morning glory, red, pink or purple. In September - purple bell. In October - white or red chrysanthemums. In November - yellow and red autumn leaves. In December - white flowers and bamboo.

For a classic kanzashi flower you need: ribbons, silk or satin fabric, ruler, pencil, sharp scissors, lighter, glue, tweezers, thread, needle, internet and lots and lots of patience! The most important thing to remember is that there are only two types of petals - round and narrow. If you learn how to make them, success is guaranteed! Then there will be only options and flights of fancy. You can create anything from the resulting flowers: hairpins, elastic bands, brooches, hoops, Christmas tree decorations and much more.

You will need a lot of patience and diligence, because the work is very painstaking, but the result is amazing and inspiring! I want to decorate everyone and everything with these strange flowers, come up with all sorts of options, experiment with fabrics and combinations of textures, and most importantly, it’s no longer possible to give up this truly wonderful hobby! The first work can make you fall in love for a long time, and there is always a continuation, because there is only improvement in skill ahead!

Kanzashi

A real woman knows how attractive her grace and beauty are. Each has its own secrets and secrets of clothing and style, makeup and jewelry. We want to introduce you to the wonderful world of kanzashi - jewelry made from fabric and ribbons.

The art of decorating hair with unusual flowers made of silk and satin came to us from Japan. A lot has changed in three centuries. By the size, quantity, color and shape of the decoration one could judge an event in a woman’s life, her status in society and family.

Flower decorations deserve special attention. Depending on the time of year, the woman chose one flower or another. Each month of the year has its own colors and fruits.

Japan is a country of thinkers and sages, therefore the choice of color for each month is so thoughtful and justified by nature itself:

For January, we chose plum blossoms, pine and bamboo branches. The main colors of the month are white, red, green.
In February, plums were chosen as decoration. The color for kanzashi is dark purple.
For March - purple peonies, white and yellow daffodils.
April – sakura branches, butterflies and lanterns.
May – clusters of purple wisterias and blue irises.
June – carnation, willow hydrangea the color of the sky.
July is a hot time, so they decorated their hair with round and folded fans.
August - huge multi-colored morning glory bells.
September - purple bell.
October – white and red chrysanthemums.
November – Autumn leaves are red and yellow.
December - green branches of bamboo, reeds and snow-white flowers.

Young unmarried girls, brides and priestesses of love especially often wore floral jewelry.

Today the kanzashi technique is known and loved all over the world. Girls and women decorate their hairstyles and clothes with delicate artificial flowers, and mothers of girls rejoice at the opportunity to decorate the head of their sun with beautiful flower hairpins and elastic bands.

We have prepared a series of master classes about Kanzashi. Thanks to them, you will easily master the intricacies of creating beautiful flowers from ribbons.

To create beautiful flowers you need to prepare the tools:

ribbons and fabric made of silk and satin;
pencils, ruler, glue, gun, lighter;
thread and needle, tweezers, scissors.

In order to create kanzashi with your own hands, you need to learn how to work with tongs, glue and a lighter. It will be difficult at first, but these are temporary difficulties. On our resource, a master class with photos will help you make kanzashi from ribbon. A master class in the video version will help you study kanzashi in more detail. We pay attention to every step and explain every action in detail.

Each flower petal requires attention and love for its work. To make a petal you need a square of silk or satin fabric. The shape of the petals can be round or narrow. To get the exciting shape of the petal, you need to process one edge with a lighter. A petal is formed by assembling its edges with special tweezers and gluing them together. The finished petals are collected with silk thread.

With the help of our “Umelitsa” tips, everyone can master the kanzashi course for beginners. A few evenings are enough to make simple floral elastic bands or hairpins for a child. Delicate flowers, Christmas trees, sunflowers, roses will delight both you and your child. More complex flower decorations for hairpins and elastic bands include lilies, snowflakes, daisies, and elegant red bows.

Having studied the kanzashi technique and made a master class with your own hands, you can move on to more complex products. Flower reflections of ice, multi-layer bows, beautiful compositions of daisies, St. George's ribbon are easy to make with our help.

Once you have acquired the knowledge, begin to put it into practice. You can make many beautiful things - hairpins and elastic bands for children, hoops, brooches, toys for the Christmas tree.