Completeness of Euro shoes. Determination of leg fullness. Determining the fullness of shoes, feet. Children's shoe sizes

To purchase comfortable shoes, people are often content with just knowing their size. But there are other factors that allow you to choose a more comfortable pair. In this article we will look at how to determine the fullness of shoes using the table.

What is the fullness of shoes

The fullness of a shoe is one of the most important parameters for shoe comfort, along with foot length, but many buyers ignore it. Sometimes fullness is also called the width of the foot or “last”.

People with wide feet should definitely take into account the fullness of future shoes. You should not purchase a product a couple sizes larger; this does not guarantee that you will be able to avoid calluses, corns and injuries. In addition, improperly selected shoes can cause the formation of joint lumps and growths.

The width of a shoe is the measurement measured around the toe box at the widest points. There are different ways to determine it: using formulas and tables. In addition, some countries have their own systems for setting this parameter. If your pair of shoes or boots does not have a fullness value, then they are most likely the standard average value.

For shoes made of soft material that diverges over time, people with standard foot lengths and widths can ignore the fullness of the shoes. But shoes or boots made of hard materials, chosen without taking this parameter into account, will easily cause calluses and pain in the feet.

Why measure the fullness of your feet?

It is necessary to buy the shoes you like taking into account your fullness. If you have wide feet, incorrectly selected shoes will compress them, impair blood supply to the feet, and this can lead not only to calluses and corns, but also to cramps and the development of vascular diseases.

It is also very important for children to purchase comfortable shoes. Ignoring this advice usually leads to improper development of the child’s foot, poor posture and coordination of movement. If people can't find shoes that fit, they try to go a couple sizes larger. Under no circumstances should you do this.

If the shoes are just the same width, but much longer in length, the legs will get tired faster; if you wear such a pair for a long time, the foot can become severely deformed, and there is a possible risk of the formation of protruding bones. In addition, shoes that are too wide or narrow will interfere with your free movement, impairing coordination, which can be a source of serious injuries and bruises. Therefore, the fullness of the feet is an important factor when choosing shoes that should not be ignored.

How is completeness indicated?

The fullness of shoes can be indicated by both letters and numbers. In Europe and Russia, the digital designation of this characteristic is applicable. In England and the USA, capital letters of the Latin alphabet are used. In our country, according to GOST, there are 12 parameters of completeness, the difference between which is 4 mm.

If you look at the difference between the largest and smallest fullness, it is about 5 centimeters. In European countries, it is more common to divide the width of shoes into 8 values, with a difference between adjacent ones of 5 mm.

Before purchasing, be sure to find out about the country of manufacture of your shoes and determine the appropriate fullness.

If you know your width in the definition system of one country, then using a special table you can easily convert it to the definition system of another country:

Simple rules for determining completeness

The value for determining the fullness of your foot can be measured in the following simple way - you only need a regular centimeter, a sheet of clean paper and a pencil. First, measure the circumference of the widest part of your foot. In addition to this value, you will also need the length of the foot. To determine it, we stand on a sheet of paper and trace each foot.

Then we find the distance between the most distant points in the resulting image: this will be the length of your foot. Ready-made width and length values ​​will help you determine fullness. This can be done using a special formula or table. When determining the length and width of the foot, the following nuances must be taken into account:

1. All measurements should be taken in the evening, when the foot is slightly swollen and swollen from physical activity during the day.
2. To purchase summer and demi-season shoes, all measurements must be taken while wearing thin socks; if you plan to buy winter boots, then you can wear thick and warm socks.
3. When obtaining the length of the feet and outlining their contour, the pencil should be held perpendicular to the sheet.
4. It is best to measure the length and width of both feet, and then simply select the largest values; This will help prevent chafing and calluses.
5. When buying a pair of shoes in an online store, you need to ask the seller to help you choose shoes of the right size.
6. In addition, you can ask previous buyers in detail and find out their feedback on the model you have chosen.

Special formula for determining the fullness of the foot

There is a special formula that helps determine exactly your completeness. It has small size restrictions, suitable for women with shoe sizes from 33.5 to 40, and men from 38.5 to 44.5.

X=0.25*A-0.15*B-C

• Where X is the completeness indicator.
• A is a constant coefficient equal to 16 for women, 17 for men.
• B - foot circumference measured in centimeters.
• C is the length of the foot measured in centimeters.

Shoe fullness table

In addition to the formula, you can determine your shoe fullness using the table.

In addition to using special formulas and tables, you can use an online calculator to calculate the value of your completeness on the Internet. This usually requires knowing the length and width of the foot in millimeters.

American completeness system

The USA has its own establishment scheme. Usually, in order to choose a suitable pair, Americans use capital letters of the Latin alphabet. Almost all children's shoes are made in standard medium sizes. But sometimes four parameters are used to indicate the width of the foot. These are A, B, D, E and EE. Of these, the smallest fullness is A. With models of boots and shoes for adults, the situation is a little more complicated. There is a special table to determine their completeness.

European completeness system

In European countries, completeness is usually indicated by numbers - from 1 to 12. There is a special table that allows you to determine your completeness according to the European system.

There are 12 completeness values ​​in total; only the first 9 are presented in the table, since they are the most common. The difference between adjacent values ​​is 5 mm. Average fullness is indicated by the number 6 (F). Anything smaller indicates fullness, characterizing a narrower pair, anything larger indicates a wider one.

Please note that the shoe sizes presented in the table are European!

A few words about children's shoes

In some countries there is no concept of the fullness of children's feet. But in others it is still used. The most famous manufacturers of children's shoes are currently carrying out various mass measurements and studies to create specific values ​​for the fullness of children's feet.

In the meantime, for comfortable wearing of shoes for children, there are different laces, fasteners and Velcro that allow you to adjust the shoes to the size of a small foot. In European and American online stores, sometimes for children's shoes, in addition to the size, they set a letter designation characterizing the width of the pair:

• M (Medium) - standard width.
• N (Narrow) - narrow foot.
• W (Wide) - wide foot.
• XW (X-Wide) - very wide foot.
• XXW (XX-Wide) - the widest foot.

1. To understand that you have chosen the right size for you, pay attention to your foot: its contours should not extend beyond the shape of the shoe, the heel should not slip out when walking, and the toes should have a little free space in the toe so that they can be used stir slightly.
2. If the pair is made of genuine leather, there is a risk that it will fit too loosely in the heel; After some time, your pair will take the shape of a leg.
3. Be sure to consider the fullness of your feet when purchasing skates, ski boots and other high-risk footwear.
4. In addition to the size of your shoes and their fit, some sellers provide other parameters that can help you find a more comfortable pair; these usually include the width of the boot, heel height, length of fasteners and much more; You shouldn’t ignore such things, and then your purchase will only make you happy.
5. When choosing a product in an online store, be sure to ask the seller to help you choose the appropriate size and fullness of the foot.
6. If you are ordering shoes and do not know your size according to the European, American or British system, measure your foot length in millimeters and, using special tables that can be found on the Internet or ask your seller, determine your shoe size.
7. The best option for purchasing a product that will please you for a long time with its quality and wearing comfort is to personally contact a specialized shoe salon, where well-trained consultants will help you with your choice.

The fullness of shoes is a parameter that should not be neglected if you want to purchase a convenient and comfortable pair. Always ask the seller to help you choose not only the appropriate size, but also the fullness.

When purchasing new shoes or boots, the question arises of how to determine the fullness of the foot for the shoe. This indicator is standard for most people, that is, no special measurements are required, but there are a number of people with narrow or wide feet for whom it is important to correctly determine their fullness when choosing shoes. If this is not done, the shoes will be uncomfortable and difficult to wear even if they are the correct size. Some manufacturers, in addition to sizes, also indicate completeness in letter expression in special tables, which makes purchasing easier. If the manufacturer does not indicate completeness, you can always rely on reviews from other customers. As a rule, many people write about the size of the shoe that fits their foot. These are subjective assessments, but they can make shoe selection easier and more accurate.

What is shoe fullness?

The fullness of the shoes allows you to determine the comfort of the shoes or boots. Unlike leg length, fullness is calculated by the width of the foot. Properly selected fullness allows the shoe to fit snugly, without pressing or loosening while walking. An incorrectly selected width leads to health problems, development of foot defects, and changes in gait. In addition, wearing shoes that are too narrow or wide in many cases is simply not comfortable: they squeeze the foot too much or dangle on it.

Determining fullness is important for people who have protruding bunions on their feet. In this case, it is recommended to always buy shoes or boots taking this feature into account, otherwise the bones may become even more sensitive, pain when walking, and calluses will appear.

How to measure the fullness of an adult's leg?

To measure the fullness of the foot, you need to do the following:

• measurements are taken in the evening, when the foot is at its largest size;
• You need to measure both feet, choosing shoes based on the larger size;
• If you are buying winter or autumn shoes, when measuring you need to take into account the thickness of the sock or tights.

The measurements are very simple; to do this, you need to stand up and place your foot on a sheet of paper. Then measure the length of the foot, accurately determining its size. The next step is to measure the fullness of the foot, to do this you need to take a soft measuring tape and measure the width of the foot under the toes - from one bone to the other, obtaining the width value in centimeters.

The next step is to determine the value using a special table of shoe fullness, taking into account the country of origin. In Russia, completeness is determined according to GOST 3927-88, markings are shown in numbers in increments of 4 mm. For European manufacturers, similar markings are used, but the step between individual fullness values ​​is 5 mm; for England, a letter designation is used, but with the same interval. For the US, fatness is determined by letter markings, but doubling and tripling letters are used to indicate very wide or very narrow legs.

In addition, a special formula is used for calculations: W=0.25*B-0.15*C-A. Here W is the fullness value, B is the coverage in centimeters, C is the length of the foot, A is the coefficient (for women it is 17, for men 16). This formula is suitable for the Russian completeness table. If necessary, you can calculate the width for other manufacturers by comparing the required values ​​using special tables.

Leg fullness - table for women and men

You can determine the fullness of your feet for women's and men's shoes from different manufacturers using a simple comparison table, which shows the fullness sizes of shoes for Russian, American and European manufacturers:

The European system provides for the following designation of completeness:

• for normal legs - F;
• for massive ones - G;
• for wide, full legs - H;
• no designation - standard completeness.

According to the American system for women's shoes, the following completeness values ​​can be determined:

• for very thin legs - 4A;
• for thin - 3A;
• for narrow - 2A;
• standard (for female leg) - not specified;
• normal fullness - B;
• slightly wider than usual - C;
• for wide feet - D;
• for very wide feet - E.

If necessary, you can determine any fullness, but you need to take into account the individual characteristics of the leg. For example, with protruding bones, the width should be chosen for a very wide foot, since it will simply be impossible to walk in a narrow or standard one.

How to determine the fullness of a child’s feet?

The fullness of a child’s foot can be determined using the formula: P = 0.25O - 0.15D - 16.5

• P - foot fullness
• O - foot circumference at the widest point (mm)
• D - foot length (mm)
• 16.5 is a constant coefficient.

To determine the fullness of a child’s shoes in the size chart for children, you can use the following data:

• for narrow legs - N;
• for the middle leg (standard value) - M;
• for wide feet - W;
• for very wide feet - XW;
• very wide foot - XXW.

This table is suitable for shoes from American and European manufacturers, but when purchasing children's products, you still need to take into account individual characteristics and the fact that children grow quite quickly. Tools such as properly fitted fasteners are also suitable for adjusting the fullness. These can be Velcro, laces or special buckles that allow you to reduce or increase the fullness while maintaining the comfort of the shoe.

A value such as the fullness of the leg is no less important than size. It is the fullness that influences how the shoes will sit on the foot, how comfortable and comfortable they will be. Incorrectly chosen fullness will lead to shoes or boots becoming too wide or narrow, swelling, pain in the foot, and calluses will appear. The consequence of this is developing leg defects and altered gait.

Shoe fullness eur g 7, f 6, e 5, d 4 - what does this mean?

Today there is a wide range of shoes on sale that meet any customer needs. Choosing a new couple is not only exciting, but also quite a difficult process. When we buy shoes in a store, we are used to trying them on, but buying using a seller's website on the Internet can be difficult for anyone. Often, to make it easier for customers to choose, precise size criteria are indicated on online portals. However, in the usual understanding, size refers to the length of the foot. Very rarely is such an indicator taken into account as its completeness. It determines its volume in the widest part, that is, in the area of ​​the bone.

Most people have average leg fatness, so many don’t even have an idea about this parameter. Those with large, wide or, conversely, narrow feet often experience some difficulties when buying shoes, without attaching much importance to the fullness of the shoes. In everyday life, the term is replaced by something similar in meaning - “block” or “lift”. People with non-standard feet tend to make the wrong choice of shoes, preferring models that are several sizes larger or smaller. Because of this, calluses often arise, and in the worst case, pathological changes in the joints occur.

Shoe manufacturers primarily produce shoes based on averages. If the fullness is not indicated on the packaging, then rest assured that the box contains a pair with medium fullness. Several systems for indicating completeness are accepted in the world:

• the English system assumes the letter designation: A, B, C, D, E, F. In addition to the standard ones, there are 10 additional ones, namely 5 for narrow legs - 2A, 3A, 4A, 5A, 6A, as well as 5 for large ones - 2F, 3F, 4F, 5F, 6F. These parameters are very rarely found in mass sales. They are mainly made to order. The step between values ​​is 0.5 cm;
• the European system implies a digital designation, in increments of 0.5 cm. The size range goes from 1 to 8;
• The Russian system for measuring the fullness of shoes is the only one that provides separate parameters for male and female feet. This rule is stated in GOST 3927-88. The step between parameters is smaller and is 0.4 cm. There are 12 sizes in a row.

In the tables, the parameters correspond to a certain foot length. If we rely on the Russian system, then value 6 is the average size, mainly used by manufacturers as a standard size. Indicators from 1 to 5 are suitable for narrow feet, and shoes with values ​​from 7 and above are designed for those with massive feet.

Leg fullness for women

To measure the fullness of a woman’s leg, it is necessary to take a measurement with a centimeter tape in the area of ​​the toe, in its widest part. The next step is to compare the obtained data on the volume of the foot with the length of the foot or its size. If the data differs when measuring your legs, it is recommended to opt for a larger value.

The fullness of the foot in the Russian system is calculated using the following formula:

W = 0.25*B - 0.15*C - A, where:

W - foot fullness;

B is the volume of the foot, which is measured by a tailor’s centimeter strictly in millimeters;

C is the length of the foot, which is also measured in millimeters;

A is a constant value equal to 17 for women.

If you are planning to purchase a pair of American-made ones, then you should take into account the symbol system, which also has differences by gender. For representatives of the fair sex, the following values ​​are accepted:

• 4A (SS - super slim) - very narrow;
• 3A (S - slim) - narrow;
• 2A (N -narrow) - slightly narrower than normal;
• B (M medium) - average, normal;
• C (W wide) - slightly wider than normal;
• D (2W double wide) - wide;
• E (3W triple wide) - quite wide.

The pitch is 5 mm, where B corresponds to 6 Russian fullness.

Leg fullness for men

Measurements of a man's foot are made according to the same principle as a woman's. It is worth paying attention to the fact that the difference in fullness for males and females is 5 mm, that is, the 2nd female size is equivalent to the 1st male, the 3rd female is equivalent to the 2nd male, and so on.

To measure fatness according to the Russian system, the same formula is used as for women.

W = 0.25*B - 0.15*C - A

The only difference is in coefficient A, which is 16 for men.

In the American system, the following values ​​are accepted for men:

• A (SS) - quite narrow;
• B (S) - narrow;
• C (N) - slightly narrower than normal;
• D (M) - normal;
• E (W) - slightly more than normal;
• 2E (2W) - wide;
• 3E (3W) - quite wide.

In order to significantly simplify the choice, tables have been created that can be used to determine completeness based on the length of the foot and its girth. All measurements are taken strictly in millimeters.

A table has also been created to determine the correspondence between Russian and European measurement systems.

Fullness of legs for a child

The foot of a small child is like plasticine. A correctly selected pair of shoes will provide the basis for the further development of the entire musculoskeletal system.

Back in 1988, GOST was adopted. It spelled out a rule for creating shoes, including children's ones, which prescribed fullness in the same way as for adults. The difference between them was in their age group:

• the booties were 1 full, that is, universal, with a foot length of approximately 100 mm;
• for toddlers, weight levels are taken from 1 to 3, with 2 considered average with an average girth of 130 mm (size range from 20 to 23);
• small children's shoes have 5 fullness values ​​(from 1 to 5), with 155 mm - 3 fullness (average). Accepted sizes are from 23.5 to 26; preschool - also has 5 fullness values, 185 is the average value, that is, 3 for sizes from 27 to 31;
• for schoolchildren (both girls and boys) 8 values ​​are accepted (from 1 to 8). Average - 225 for girls (4th grade) and 230 for boys (5th grade). Size range from 31 to 36. It is from school shoes that the fullness of shoes begins to differ by gender;
• for teenagers, 8 parameters of completeness are accepted. For boys - 260-265 (4-5 values) are considered average, and for girls - 230-235. Size range from 35 to 41.

The difference between adjacent values ​​is 5 mm. According to GOST 3927-88, 8 fullness sizes are produced for mass production (from 1 to 8, subsequent ones are made to order). However, the data today is considered hopelessly outdated. The old standards were developed based on children who grew up in those times, and today, as manufacturers note, children have begun to mature earlier. Manufacturers are adapting to modern youth and have begun to produce shoes that can be adjusted for fullness. This function is provided by the presence of Velcro or lacing.

In order to choose shoes correctly and not make a mistake, you need to place the child on the floor where there is a sheet of paper and trace the feet of both feet. When placed on the surface, the leg increases slightly when compared to the foot in a suspended state. Based on this layout, you can navigate when choosing a model. The stencil must be tried on the insole, but not on the sole. Some manufacturers put a decorative allowance in the sole, which can be misleading. Leg length is measured from the middle of the heel to the middle of the big toe. If the leg lengths are different, then the larger size must be taken into account. If you plan to wear the purchased pair on socks, then measurements must be taken with socks on.

Unfortunately, children very often cannot tell about discomfort, so when purchasing it is necessary to rely mainly on the measurements taken. The fact is that a layer of fat remains on a child’s foot, which reduces sensitivity, and therefore the baby simply does not feel how the sandals or boots are pinching, deforming the foot. You can invite your child to try walking. If you notice lameness, the shoes are small; if the child drags his feet, the shoes are large.

Self-respecting manufacturers are currently conducting various studies and mass measurements of children’s feet in order to accurately recreate a comfortable last.

It is very important to choose shoes with blunt toes for children. Shoes with pointed toes can impair blood circulation and toe growth, which can lead to flat feet in the future.

When choosing shoes, place your finger in the space between the heel and the heel. If your finger fits in too tightly, you need to choose a larger size, and if there is free space left, choose a smaller size. A properly selected size will allow the leg to be in normal tone, without unnecessary tension.

The same procedure must be followed when determining completeness. Try to stick your fingers through both sides of the leg.

Important! Don’t be persuaded by salespeople and members of the older generation about the required fullness of shoes if you feel that the shoe is too tight for your baby. The first category seeks to sell a product without thinking about the health of your child. Old people often rely on their own sensations - for comfort they need more support for their feet than children.

Conclusion

Shoe patterns from each company may differ despite the standard established by GOST. Having found a seemingly ideal size from one manufacturer, you should not rely on just one pair. The same size from another company may differ slightly.

Knowing the individual characteristics of the foot, everyone will be able to make the right choice and find a suitable pair, even if they previously experienced enormous difficulties.

As for children's shoes, today the shoe industry provides the opportunity for every parent to choose the optimal pair for their child. The only problem is that the size chart of one company may differ greatly from the size chart of a second manufacturer. When choosing in an online store, you cannot ignore and find out the size tables provided.

In the Gabor range of women's shoes, both the pan-European size system, familiar to Russia, from 35 to 42, and the German size system, from 2.5 to 8, are used. You will find the correspondence of these sizes in the table.

For your convenience, the table also shows size values ​​in centimeters. To determine your size in centimeters, place your foot on a piece of paper and trace the outline of your foot, holding the pencil strictly vertically. In the resulting figure, draw a line from the big toe to the heel and measure this distance. Do the same with the second leg. If the length of the foot on one leg is different from the other, focus on the larger figure. Find in the table the resulting size in centimeters and the corresponding shoe size to order.

In addition to the usual size, having different fullness values ​​will help you choose the most comfortable Gabor shoes. In our catalog, shoes with increased fullness are marked with the icon

Particularly comfortable fullness “G” and “H”

Shoes with increased fullness G and especially comfortable extra fullness H are designed for wide feet. Such shoes provide additional volume in the area of ​​the ball of the foot, in the toes, and in the instep. This gives either leg the space it needs. The Fullness Best Fitting is another fit option designed to fit standard width feet, but with more room in the toe area.

When choosing Gabor boots, pay attention to the width of the shaft. In our catalog, on the model description pages, both the size of the boot and its width in centimeters are indicated.

Size S – for narrow calves

The Gabor company is one of the few shoe manufacturers that has boots with narrow tops in its program. Even with thin calves, boots look attractive if they fit snugly to the leg.

Large fullness L

Every woman's foot has its own shape and characteristics. Many Gabor wide-top boots are equipped with additional features to ensure an optimal fit to the shape of the foot: rubber stoppers, stretch materials or adjustable flaps all provide the greatest feeling of comfort.

Extra wide XL and XXL

The particularly wide cut shaft ensures maximum comfort with a full and firm calf. Both wide-top and extra-wide-top boots are often equipped with additional features to ensure the best fit to the shape of the foot: threaded elastic, stretch materials, adjustable flaps, anything that creates a feeling of greatest comfort.

Variable completeness

Variable width Vario provides a flexible system for individual boot shaft widths. The width, depending on the model, can be changed using elastic inserts, adjustable buckles or fasteners, or by lacing. Thus, the boot suits different calf shapes, and also suggests different wearing occasions: for example, depending on your mood or style, you can tuck your trousers into the boots or let them out. The boot always fits perfectly!

Anna Turetskaya

Reading time: 39 minutes

A A

Currently, there are many models of shoes for both men and women. There are cases when people, when measuring, cannot accurately decide on the choice, and in the end they choose it not according to the size or shape of their feet. For example, the size is yours, but the fatness is more than necessary, or vice versa.

Often, the wrong shoe size leads to various diseases. To choose the right shoes, follow our recommendations.

How to determine the shoe size for an adult - choose the right size!

Every person understands the shoe size as the length of the foot, but not everyone realizes that the size of a shoe is its length and width. Shoes must also be selected according to the width of your feet.

For example, if a person who comes to the store has narrow feet, then he needs to choose shoes that are a smaller size, and if they are wide, then vice versa - a larger size.

There are several shoe sizing systems:

To determine your shoe size, do the following:

• Take a blank sheet of paper and a well-sharpened pencil.
• Place your foot on the paper and carefully trace it. It is recommended to do this in the evening, since in the evening your legs swell - especially if you have an active lifestyle. If you wear future shoes with a sock, wear a sock.
• Remove the foot from the paper and use a ruler to draw a long line.
• Measure both legs and choose the largest number.
• Finally, you need to round this figure to 5 millimeters and choose a size in table.

Winter and summer shoe sizes- one. But you should remember that when trying on winter shoes, it is better to give preference to a larger size. This is due to the fact that winter shoes may have artificial or natural fur, which will make your feet feel tight. Also, in the cold, your feet swell and your shoes begin to squeeze them. Be sure to wear a thick sock before measuring.

When choosing summer shoes, one of the nuances is selection of sneaker size . They also need to be chosen so that the shoes do not put pressure on the toe and are loose, otherwise you run the risk of injury to the joints.

Foot fullness for all sizes of women's and men's shoes - how is fullness measured, and why is it necessary?

Sometimes a person does not have the opportunity to try on the shoes he plans to buy. To do this, you can measure the fullness of your feet at home in order to correctly determine your shoe size without trying on.

Completeness can be determined using the following formula: W = 0.25V – 0.15C – A , where W is the fullness of the leg, B is the girth of the foot in millimeters, C is the length of the foot in millimeters, A is a constant coefficient (for men – 17, for women – 16)

Here's an example: Let’s say your foot length is 26 mm, your foot circumference (at the widest point) is 24 mm. Therefore, 0.25*240 – 0.15*260 – 16 = 2. We come to the conclusion that according to the Russian system, the fullness of your foot is 2.

You can also find out the fullness of your legs using the table. First, take the leg measurements shown above using paper and pencil.

Then compare the width of the foot and the length.

The fullness of the foot is shown in the top cells of the table:

In most cases, the values ​​​​given in the table are suitable mainly for classic shoes, since their material is more rigid and does not have the ability to stretch. Shoes made of soft material may lose their shape over time when worn and stretch.

Size chart for women's shoes - table of shoe sizes for women

Before paying attention to shoe sizing charts, you need to measure the length of your foot and compare it with the measurement system you need.

For example, if your leg length is 24 cm, then according to the Russian measurement system the size will be 37.5. If 23.3, then it is better to give preference to shoes with size 36.6.

Determine your size using the table below:

Shoe size chart for men - size chart for men's shoes

The size of men's shoes can also be determined according to the table:

Attention: According to the Chinese system, there are almost no large shoe sizes for men.

If you liked our article and have any thoughts on this matter, please share with us. It is very important for us to know your opinion!