How to make a leather bracelet with your own hands for men and women. DIY leather bracelets - simple and beautiful! How to make a braided leather bracelet

Anna Pavlenko

Leather bracelets are universal accessories that have been in fashion for several seasons and remain popular. Women's baubles can be woven or flat, because the preferences of girls are different. But many agree that handmade products are interesting and look much more original than those sold in stores.

They come in different colors, sizes and shapes, you can use a wide variety of weaving patterns and a huge selection of methods for weaving leather products.

Such products can look both elegant and extravagant. It depends on the weaving method. How to learn to weave leather bracelets? First you need to purchase small pieces of leather and cut them into strips. There are many weaving patterns, but it is better to start with the simplest ones.

Bracelet "braid"

This is one of the simplest and most elegant solutions for a leather bracelet.

Weaving products can be done in several directions.

1. Wrap a long leather strap around your wrist and add 2 centimeters to this length, this should be enough length. The width of these strips may vary. You can try weaving from narrow strips 1.5 to 3 centimeters wide;
2. Using a hole punch, make holes at the ends of the strips;
3. You can attach a metal button to the holes or thread laces through them. These are standard ways to secure the ends of products;
4. This blank can also be decorated with rivets or patterned holes;
5. Then, you should weave a traditional braid of three stripes.

You can weave a slightly unusual braid using another method

1. Using a ruler, a wide leather ribbon should be divided into three equal-width parts and cut evenly along, but not all the way through. The ends can be decorated with decorative buttons;
2. As a result, you will get three stripes from which you need to weave a braid: No. 1 - on the left, No. 2 - in the middle, No. 3 - on the right;
3. You can start weaving. One edge of the bracelet must be threaded between strips No. 2 and 3 and lowered down. As a result, the stripes will be twisted;
4. Then you need to pass the edge of the bracelet between strips No. 1 and 2 and lower it down;
5. We repeat the previous steps one by one until the bracelet is ready;
6. The last step should be to straighten the bracelet.

Different types of leather behave differently depending on its softness, finish and thickness. Some bracelets will turn out tight, some - looser, it all depends on the technique and quality of weaving, as well as on the skin and its plasticity.

If you have mastered one version of leather weaving, you can continue to learn how to weave bracelets using various techniques.

Bauble with embroidery

You can add a leather ribbon decorated with appliqués, colored threads or interesting studs to a thin woven bracelet.

This can be a strap about 3-4 cm wide. You can buy special leather for baubles, or take an old belt, bag or the top of a soft old shoe.

The leather can be black, it will contrast beautifully with bright embroidery, brown leather also looks beautiful and stylish.

You should also stock up on metal decorations, such as heart-shaped ones, which can be purchased at any craft or scrapbooking store.

You can embroider with thick stitches of bright thread or decorate the product with decorative elements. Such a product can be fastened with an ordinary button.

How to weave a leather bauble

You will need:

• narrow strips of leather or leatherette of any color;
• thick cord or wire;
• lighter;
• large lock with hook;
• scissors;
• Super glue.

How to weave a bauble:

1. Cut a piece of wire or cord 15 cm long;
2. Singe the ends of the lace using a lighter or other fire;
3. Make a loop;
4. Using glue, you need to attach the loop to the surface on which you will weave the bracelet;
5. Insert the leather cord under the wire;
6. Braid the wire like a double flat knot used in the macrame technique;
7. Repeat until you have tied the entire cord. Knots can be placed on only one side or on both;
8. Cut off excess cord;
9. Glue the padlock at the end, hiding the ends of the wire and both ends of the leather strip underneath.

Making bracelets this is a very interesting and creative activity. You don’t always need a master class for this; sometimes a photograph is enough for an idea to pop into your head. Today I offer a selection of various models from the Internet with a short accompanying description. The models are very simple, but each idea has a useful thought. Moreover, many people really liked the last review, let’s continue the topic.

Often these bracelets use charms and connectors. The proposed version uses a flat natural leather cord and a ring connector. A button fastener with the help of connecting rings measuring approximately 4-5 mm is attached to the end for ribbons and cords:

Depending on what accessories are used for the bracelets, the style and mood of the jewelry completely changes. A few more options for example, made according to the same scheme. Waxed cord is used here, but with leather laces this bracelet will be more durable.

If the hole is too small, you can use end caps. It is better not to use connecting rings in such a place; when tensioned, they can unbend. Or take the strongest ones, small in diameter and 1-1.2 mm thick.

In our store there are a lot of connectors suitable for such bracelets: birds, fish, twigs, lizards of different colors, flowers, eyes, lips, etc.

For a large item or button, you can simply thread the cord through the holes:

In this version, the top connector is also not fixed:

For the summer, you can make a bracelet with an anchor pendant. In order not to search for a long time, I selected several pendants for example: number one, number two, number three, but in general we have a lot of them)))

A few more options for leather bracelets and laces:

Fun solution:

This is how easy it is to make a lot of bright bracelets for the summer! Have a good preparation for the hot season!

DIY leather bracelets are another type of jewelry that occupies a popular position in modern women's and men's fashion. Let's talk about examples and ideas of such bracelets today. In the master class we will assemble a stylish bracelet from thin leather cords and decorative connecting rings.

Leather bracelets are very diverse in their assembly. Craftsmen use both thin and dense leather in their work; leather cords; stripes; flaps, etc. Leather elements can play a major role in decoration, acting as the only base or some separate decorative fragment decorated with beads, beads or pendants. Let's look at a few examples of leather bracelets.

Leather bracelets in the form of one or more stripes or cords, decorated with a decorative lock, separator beads or pendant:

Braided bracelets made of leather cords, decorated with beads.

Leather bracelets with printed or embossed inscriptions or patterns.

Curly bracelets made of leather, using cutting.

Men's leather bracelets decorated with studded beads or metal links.

Leather bracelets decorated with embroidery.

Voluminous leather bracelets with a textured texture, decorated with elements of jewelry fittings.

Bracelets made of thin leather in the form of a gathered accordion.

Bracelet made of thick leather, with a decorative three-dimensional element in the form of a leather flower, with a toning effect.

Leather bracelet on a metal blank.

Master class on a bracelet made of leather cords and decorative connecting rings.

Accessories:

Leather cord 1 meter

End clamps pcs

Decorative connecting rings 3 pcs

Carabiner lock 1 piece

Small connecting rings 2pcs

Tools: Scissors, pliers.

Assembly:

We cut 6 leather cords, place them in the end clamp and clamp the end teeth with pliers. For reliability, before clamping, you can apply a few drops of glue to the end cap.

We lay out the cords on the desktop as shown in the photo below. We retreat approximately 5 cm from the edge of the bracelet. We draw a decorative ring into the central two cords.

Under the ring, we place side cords on the central cords, as if braiding a simple braid, and then bring the central two cords back up so that they are on top of the decorative ring.

We again draw a decorative ring through the central cords.

We braid the braid under the ring and bring the central cords up again.

We repeat the steps one more time.

We fix the remaining edge of the bracelet as at the beginning, using an end clamp. Add a carabiner lock through small connecting rings.

The bracelet is ready!

Girls, summer is coming and wouldn’t it be time to take care of updating your jewelry box? I suggest starting today with a couple DIY leather bracelets– they are made easily and simply. Interested? Then let's gut out mom's old leather jackets and dad's belts. The only request is not to succumb to nostalgia for parental upbringing and cut your father’s straps into thin strips. Go.

Option one.

This is a bracelet bracelet. Delicate, beautiful, thin. He’s been asking for a pair for his hand, so I advise you to weave several pieces at once. To make it, you can buy a leather blank, or you can make it yourself: Cut a wide strip of leather along two lines, and use an awl to attach buttons to the ends.

Now is the time to start weaving. Thread the lower end of the bracelet alternately with three threads and straighten the twisted strips so that the bracelet is flat.

Each of the braided bracelets differs only in the thickness of the braids. Don't worry if you don't succeed in weaving the bracelet the first time. Train and become a pro.

Option two.

This bracelet is made in pastel lavender colors. It is gentle and thin. Perfectly suited for spring and summer outfits.

We will need:

• white, light green and lavender thread (about 40 cm each)
• strip of white leather (40 cm)
• silver chains about 20 cm
• silver plug with clasp
• scissors and glue

Step 1: Cut the thread into nine pieces of about 20 cm, two for each color (green, lavender, white and white leather) and a silver chain. Place them in groups of three, as in the photo. Fasten the edges of the ribbons.

Step 2: Start weaving. To achieve an even pattern, make sure that the different colored threads remain in the middle of each strand.

Step 3: When you get to the end, secure before cutting off the ends. Glue the ends of the bracelet and clasp together.

Step 4: If the bracelet is too short, extend it with a chain.

That's it - your bracelet is ready!

Option three.

This bracelet requires some skill with a sewing machine, but the results are worth it. In our version it is white and pink DIY leather bracelet, but you can change the colors and choose a different composition.

So, get ready to work:

1. scissors, knife;
2. a piece of white leather measuring 3x25 cm;
3. thick pink fabric;
4. hooks;
5. ruler;
6. sewing machine.

Cut the leather into nine strips 0.33 cm wide. Divide the strips into three parts: three strips each and braid.

Fold the pink fabric as shown in the picture and sew it to the skin. Secure the hooks. That's it, the bracelet is ready - it's time to show it to your girlfriends.

Option four.

This bracelet is radically different from the previous three in that it is not woven using braids. Measure your hand and calculate the length of the leather strips (you will need two). In addition to them, stock up on coarse thread and follow the instructions indicated in the figure. Good luck.

Option five.

This cute bracelet contains a lot of elements: a braided braid, stones, and even chains. I recommend preparing thoroughly.

Materials:

1. knitted fabric
2. thread, needles, pins
3. scissors
4. ruler or tape measure
5. leather cord
6. thin metal chain
7. 2 wooden beads
8. 2 fasteners
9. jewelry pliers

Bracelets are one of the most popular types of jewelry. Therefore, many fashionistas and fashionistas want to know how to make a leather bracelet. In order to please yourself or a friend with a stylish decoration, first of all, you should find suitable patterns.

These diagrams clearly show what the finished product will look like:

They also answer the question of how weaving occurs:

How to make a leather bracelet for men

Men's bracelets are most often woven from leather. They look elegant, courageous and even a little brutal. The jewelry you have woven will be the best gift for your loved one. And to make your work easy and enjoyable, below is a step-by-step master class on leather goods.

You will need:

1) A small piece of leather;

2) A set of buttons;

3) Set for inserting buttons:

4) Hammer and knife.

Sequencing:

1) Prepare a piece of leather, cut it to the desired shape according to the length of the wrist.

2) We secure with a pin the place where we want to make a button.

3) Remove the bracelet and lay it out.

4) Lay out the buttons and attachments on them.

5) In total, you will need four types of buttons with attachments.

6) We make punctures on the skin in the places where the pins were. You can use a gypsy needle.

7) Expand the hole. We insert the rod and hit it with a hammer.

8) You should get a hole like this.

9) We make the same hole on the other side.

10) We put the nozzles on the plastic plate.

11) Insert the button.

12) Insert the bottom part of the button. It requires other tools.

13) We put the attachments on the plate.

14) Insert the button like this.

15) It should turn out like this.

The bracelet is ready.

You can decorate the product with another button.

How to make a leather bracelet for women

Leather bracelets look very original on women's hands. They go well with jeans and sportswear. Women's jewelry is more elegant and sophisticated than that of men. They are usually thinner and more difficult to manufacture. Today we invite you to get acquainted with the weaving of a very simple and original women's leather bracelet.

You will need:

1) Thin belt.

2) Chain.

3) Scissors.

4) Hole puncher.

Sequencing:

1) Cut out two rectangles from the belt.

2) Cut out arrows from leather, using a template.

3) Make two holes in the arrow and stretch a chain through them.

4) Wrap the chain around your wrist and cut off the excess.

History of leather jewelry: myths and truth

Leather jewelry is easy to make and very durable. Your young man will be able to wear them for many years. And every time he puts on a bracelet, he will think about you.

Bracelets, both men's and women's, have a long history of existence. Even a thousand years ago, in the north of Russia, wrist jewelry was made from birch bark. And in distant southern states they made similar products from bird feathers.

Leather bracelets do not have such a deep and ancient history. However, their story can get a little scary if you consider one thing. Now in some countries of Africa, Australia and the distant lost islands of the Pacific Ocean, aborigines living in wild primitive tribes wear very strange bracelets.

These wrist ornaments are made from tanned animal skins, as well as the dried skin of enemies. It is a symbol of strength, power and victory.

Men's leather jewelry has a rich history; they trail behind them a trail of mystery, bloody battles and furious battles. Therefore, women consider them very beautiful and sexy.

Women rarely wear this kind of accessories. They are preferred mainly by ladies who dress in a sporty style. These beauties look very good in sports jackets, jeans and sneakers. And leather jewelry suits them surprisingly.

A selection of videos on the topic