How to make a weapon out of paper with your own hands: mini-master class. How to make a gun out of paper? Paper crafts weapons

In order to make a gun out of paper, you will need two strips of different lengths.

1. Roll the strips along the wide side 6-7 times to obtain round tubes. One of the pipes will serve as the muzzle of our pistol, and the other will be its handle.

2. Bend the parts of the future pistol in half.

3. Take a short piece and fold its ends in the opposite direction from the holes.

4. Take the long piece and pull it through the short loop.

5. Our pistol is assembled.

How to make a revolver out of paper?

In order to make it from paper, you will need two A4 sheets.

1. Take an A4 sheet and fold it along the wide side 6-7 times to form a tube.

2. Bend the resulting tube in half.

3. Bend the ends of the workpiece with holes at an angle of 120 degrees.

4. The barrel of the gun and its handle are ready.

5. Fold a sheet of A4 paper in half and cut into equal parts. For the drum we only need one part. Take it and roll it along the wide side 6-7 times to get a tube.

6. This tube will serve as a drum for our revolver.

7. Wrap the resulting tube around the barrel blank with the handle several times.

8. Bend the ends sticking out in front inside the revolver and insert them into the slot of the revolver drum.

9. Fold the remaining part of the A4 sheet in half and cut it. Roll one part of the sheet along the long side into a tube. Roll the other part along the short side into a tube.

10. Insert the resulting tubes into the revolver blank.

11. The cowboys' weapons are ready.

How to make a gun out of paper?

In order to make a gun, you will need two rectangular sheets of different lengths.

1. Roll the strips along the wide side 6-7 times to obtain round tubes.

2. Bend the resulting tubes in half and iron the fold with your hand.

3. Take a long piece and bend part of it inward so that a protruding corner is formed. Bend the ends of the short workpiece at angles of 120 degrees.

4. Insert the ends of the long piece with the holes into the resulting loop of the short piece and pull them with a little force to secure.

5. The hunting rifle is done.

Origami weapons are an attractive activity not only for boys, but also for connoisseurs of various types of weapons who are passionate about the art of creating paper figures.

You can make edged weapons (knives, blades, swords) and firearms (pistols, shotguns, revolvers) from paper. Special templates for origami weapons are not needed; everything is made from paper squares and rectangles. Such crafts can be used as toys or props for productions and costume parties. Paper cannot be used to injure anyone, and if broken, it is easy to reassemble the sword or pistol from a suitable sheet.

Most of the presented master classes contain assembly diagrams that are easy to understand for beginners and children.

Speaking about ninja weapons, one cannot help but recall shuriken - a traditional Japanese melee weapon in the shape of a star with several rays-blades. Typically, an origami shuriken is folded from two paper squares and has four corners. Shuriken is easy to fold using the modular origami technique. Beginners can also cope with this task.

Shuriken with four arms

This master class suggests making two types of shuriken - with 4 and 8 rays. For a traditional shuriken you will need one single-color square or two multi-colored rectangles, scissors and a little time.

How to make origami shuriken from one square. You need to bend the square in half and cut it along the fold. Bend the resulting rectangles lengthwise.

Bend the corners on each workpiece as shown in the picture (mirror image). Fold them again mirror to each other and turn them over.

To connect the resulting origami figures, place one module on top of another crosswise and tuck the free corners of one module (fold along the lines shown) into the pockets of the other. Turn the origami workpiece over and also tuck the free ends of one piece into the pockets of the other.

Shuriken with eight arms

An 8-pointed shuriken consists of 8 squares - future modules. Shuriken can be one-color, two-color or multi-colored. To assemble an 8-pointed origami shuriken, you need to follow these steps step by step: bend the square crosswise diagonally and unfold it. Align the left side with the diagonal fold.

Fold the top side of the square back along the diagonal line. Fold the side along the red line, aligning points C and B, as shown in the photo. Turn the origami workpiece on its side and bend it in half along the red line, aligning the green lines.

Fold the bottom corner - the first module is ready.

Repeat steps 1-6 with the remaining 7 squares to make 8 origami modules.

Start combining all the modules: peel back the top layer of the module and insert another into its pocket.

Tuck the previously folded edge into the pocket of the attached figure.

Connect the remaining modules in the same way.

After attaching the last part, turn the “ninja weapon” over and tuck the end of the first part into the pocket of the last one.

More complex origami shuriken figures can be assembled from the modules. The photo below shows a few ideas:

In addition to shuriken, ninjas rarely do without a special combat knife - a kunai. It is proposed to make it according to the diagram and video below:

Another cold weapon made of paper is the ninja sword. Detailed assembly instructions are presented in the video.

Video: Origami sword for real ninjas

Firearms

MK is dedicated to creating various models of firearms with your own hands using the origami technique.

The simplest pistol can be easily made from a square sheet. To do this, you need to wrap the edges on both sides to form a rectangle and bend it in half. Then bend the edge of the workpiece diagonally inward - you get a handle. To form the muzzle, bend the top edges down.

A more elegant pistol is assembled from two rectangles. To do this, you need to perform the following steps step by step.

It's no secret that boys love to play war games; they always have soldiers, cars and, of course, weapons.

But the same gun can be easily made from paper. Here is an example of the simplest way to make a gun out of paper using the origami technique, without glue or scissors.

Fold a sheet of paper into stripes.

Bend it in the same way as shown in the figure.

The finished weapon looks like the photo below.

Materials needed to make a paper gun

To learn how to make a gun out of paper, follow the simple recommendations described below.

You will need:

scotch;
scissors;
A4 paper.

Instructions for making a gun from paper

When everything is prepared, you can begin. How to make a hunting rifle out of paper? Let's look at this in more detail.

Roll the sheet into a tube and secure it with tape so that it does not fall apart. Make another tube of the same diameter.
Roll the sheet into a tube with a slightly larger diameter so that the previous tubes can fit into this one.
Insert sheets rolled into smaller tubes on both sides into the latter. Secure with tape.
Make another such long tube consisting of three sheets. Trim so that the length is the same and glue them together.
Now we need to make the butt. To do this, take two sheets of paper and cut out identical oblong trapezoids from them. Cover thoroughly with tape on all sides. Insert and glue the stock between the tubes.
Cover the stock with a new, flat piece of paper to make it look nice.
Roll the two sheets into two separate thin strips. Form one into a circle. And fold the other in half and put it on the circle so that three centimeters are in the middle of the circle.
Insert this structure from below under the rifle. You guessed it, it will be the trigger.
You can also make a sight by twisting another strip into a circle and gluing it to the top.

That's all. Now you know how to make a gun out of paper. It's easy and fast. And boys will be interested to see the process of making weapons.

And here is another interesting scheme, thanks to which you can also make a gun.

Paper weapons that shoot

But many will rightly note that a gun that does not shoot is a very dubious and uninteresting toy.

Therefore, below are instructions on how to make a gun out of paper that shoots. This task will be a little more difficult, but playing with such a gun will be much more interesting.

You will need:

colored paper of your choice;
White paper;
scotch;
hot glue.

Let's make a shooting weapon out of paper together

See how to make a gun out of paper.

Load the bullets into the top hole and pull the trigger. Here's a toy. Well, so we figured out how to make a gun with our own hands from paper.

There are many different schemes and ways to build a weapon out of paper, and even one that shoots. Start with the simple ideas suggested by origami, moving on to more complex techniques. This way, you can collect a whole arsenal at home and play with a large group until you get bored.

And such activities are also useful for children, because they develop hand motor skills and accuracy.

Today you will find out How do set weapons from paper. Naturally, we will need as a material, and as tools - scissors, tape or glue. In addition to the above, of course, we will need the ability to carefully work with paper, as well as patience.

Making weapons out of paper

Before you start make weapons out of paper, read the instructions carefully.

Making a paper gun

You will need two strips of paper of different lengths.

Paper gun folding diagram

Fold the blanks in half.
For a short piece, bring the ends inward.
Insert the long piece into the loop of the short one.
The gun is ready.

Making a revolver out of paper

To make a revolver, we need four rectangular paper sheets of different sizes.

Folding diagram of a paper revolver

Fold the larger rectangle several times along the long side to form a tube.
Fold the blanks in half.
Turn the ends of the workpiece at an angle outward.
The base is ready.
Fold the middle rectangle several times along the long side to form a tube.
A blank “drum” appeared.
Wrap the base of the revolver with the blank from step 6.
Wrap the ends of the workpiece remaining in front back and insert them into the slots for fastening.
Roll two small rectangles into a tube.
Insert the “barrel” into the base blank.
The revolver is ready.

Making a gun out of paper

To complete the model you will need two paper strips of different lengths.

Paper gun folding diagram

Fold the strips along the long side several times to create long tubes.
Fold the blanks in half.
For a longer part, turn the fold point inside the workpiece to get a tongue sticking up. For a short piece, lower the ends down inward.
Insert the ends of the long piece into the loop of the short one.
The gun is ready.

For dessert, we suggest watching a video about what kind of mechanical robot can be made from ordinary paper.

Cold steel weapons can be made from a sheet of paper. Wait to refute this statement and share your skepticism! The Japanese art of “origami” and martial traditions in the manufacture of weapons combined into an almost mystical action and solved the problem of how to make paper shuriken.

Shuriken (also called “shuriken”, “shuriken”) is a Japanese throwing weapon of ninja spies, used for a surprise attack and disorientation of the enemy. In some countries, real steel shurikens are dangerous weapons and are prohibited from being owned. Or a paper shuriken, which you can make yourself at home, and not be afraid that someone will judge you!

“Peaceful” origami and combat shuriken are things that are far from each other, but opposites attract. So, today we will try to tell you how to make an origami shuriken that can be thrown over a decent distance.

To create origami shuriken, square sheets of colored paper are usually used.

So, to create a “killer” ninja weapon we will need:

2 square sheets of paper (can be multi-colored);
hands growing from where they are supposed to grow;
5-7 minutes of free time.

Have some paper and patience? Now you can go directly to an explanation of how to make shuriken from paper. Consider the fact that 2 parts are made, which are then connected to form a ninja “flying star”.

When you don’t have paper on hand, but want to make your own “ninja star”, use banknotes!

To become the owner of your own paper shuriken in just a couple of minutes, follow these steps:

Fold the sheets in half and then unfold them back to their original shape.
Bend both sides to the center where the fold line is marked.
Bend the corners so that you get acute angled sides (the parts should mirror each other).
Bend the pieces diagonally on both sides.
Place the part resembling two “soldered” triangles on top of the zigzag part.
Thread the corners of the bottom piece into the triangle “pockets”.
Turn over the semi-finished shuriken and do the same with the other corners.
Paper shuriken is ready for battle!

This simple pattern will allow you to make the coolest paper shuriken ever!

Don’t rush to throw away “broken” CDs! They can also be adapted for making shuriken. Want to know how to make shuriken from a disk? Very simple! To do this you will need a disk, a ruler, sharp scissors and a black marker.

“Batman”, “Teenage Mutant Ninja Turtles”, “Naruto”... Remember where else you can see shurikens?

The principle of making shuriken from a CD is extremely simple.